Zone Manager

RE: Zone Manager

Shane Regan — Tue, 12 Jul 2022 08:32:36 GMT

Morning Amrit,

Absolutely, I will take care of this now for you.

Should you have any future suggestions or queries on other workflows just let us know.

RE: Zone Manager

Amrit Bhambra — Mon, 11 Jul 2022 15:36:52 GMT

Hi Shane,

Thanks for the explanation.

I believe the current format is sensible - could I suggest the addition of a filter option which shows the zones created as well as an option for no zone applied.

This way I would be able to distinguish which room(s) are in which zone(s).

My current issue is that having a large number of rooms means it is quite likely I may accidentally miss a room or put it in another zone.

It would be much appreciated if you could log my suggestion.

Amrit

RE: Zone Manager

Shane Regan — Mon, 11 Jul 2022 14:58:03 GMT

Hi Amrit,

Many thanks for this - suggestions of improvements are always most welcome.

In relation to your points, I would firstly just emphasise that the reason for this is that the zone manager allows you to enter a room into multiple zones.

This is so, you can group rooms via any criteria you wish - HVAC / lighting type / occupancy type / aspect / etc. This is so the rooms can be grouped to assign design criteria, and also easily be selected to run simulations/calculations.

Hope that gives some insight into the reason for this? I can of course still log your suggestions with development.