install obd update 10 on windows 11

Hi James,

Great to hear, thanks for letting us know.

Regards

Shane

Hi folks

I managed to get true by reinstalling Windos and than install OBD 1update 10

Many thanks

Hi James, 

That would most likely be due to your Windows permissions, preventing the software seeing the other locations. You would need your IT to ensure you have full permissions, or you could test by running the install/update as Full admin and see if it persists. Entering the path directly should be perfectly fine to do in the meantime as a workaround.

Regards,
Shane

Thanks Shane

I can enter the path for my network locstion manually,

but when I try to use the tree button to browse I get the image I showed.

Thanks

James

Thanks James,

You can find guidance in relation to this in the following article - if you follow the section regarding custom configuration this should help walk you through the steps.

Installing OpenBuildings Designer - OpenBuildings | AECOsim | Speedikon Wiki - OpenBuildings | AECOsim | Speedikon - Bentley Communities

Any folder can be selected for a custom installation - the only thing you need to ensure is that you have full read-write access to that folder location. Your IT should be able provide you with the required permissions should you not have them.

Hope that helps.