Question: I know how to turn off (hide) roofs however how do you turn them back on ?
Hi Graham, hope you're well. You should be able to just right click on the roof in the project tree as below and then Show Roof - is this not displaying for you?
Shane Regan | Principle Building Performance Support EngineerHevacomp to OpenBuildings - A complete guide for every user | Bentley Communities
Answer Verified By: Shane Regan
Thanks Shane, obviously something amiss with my setup - this message is VERY hit and miss on my system, the majority of the time I only get "Hide Roof". Also even with all roofs turned on I still don't get anything showing in the 3D view
Hi Shane
Ok, I think I’ve narrowed this problem down to when the problem occurs - after I’ve set-up a roof to the underside of the false ceiling I’m unable to turn the roof back on. It's also a different project from the one I reported above.
Hi Graham,
Been testing this here but still working for me!
I'll log a Service Request now to get that project off you and will take a look. You should get an email shortly.
Thanks for bearing with me on this one. From what I can see I think you may just have missed the final step with the roof - it looks like the surfaces are not showing as the roof may not have been Setup over the rooms below?I ran through the Setup via the following:The roof surfaces then appear in the model:
Hopefully that's it, let me know how you get on.
The procedure I use is to "setup" when I'm in the design function of the roof menu NOT going to the setup direct as use've done - could this be the issue ?
Cheers Graham
Thanks Graham,So via the option below? This should be perfect, as goes to the exact same Setup menu. If you try that way on the project now does it resolve the issue?