Fill will not display in the clip volume within the 3D model
The reason that the Fill does not display in your clip volume within the 3D model is because Hidden Line Display mode is used in the view and Hidden Line Display Mode never supported Fill in a Forward View. If you place a 2d block with opaque fill in it, then render that view in Hidden Line mode, the Fill will disappear from the view also.
The only option to get Fill to display on a bar scale, for instance, is to assign a Part definition to it with Rendering Properties using a Geometry Map. Geometry Maps are needed to get hatching and patterning to display on forward and reflected views in drawing views or clip volumes. This will still not assign Fill, but you could use a very close hatching pattern which will mimic Fill on the element of the Cell.
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this " Comments or Corrections?" section. THANK YOU!
We got fill to work for our 2D symbols, such as emergency lights, in Dynamic Views by changing the Forward View's Display Style > Render Display option to Wireframe. Specifically, we changed the Display Style > Forward - Drawing > Render Display option to Wireframe. So far, we haven't found anything adversely affected by this.
BIM Manager - Mason & Hanger