When using MicroStation SS3, the manipulation of line work is very slow, but only when a Cloudworx database is loaded. This, however, does not happen when using MicroStation SS2 and Bentley Cloudworx. When trying to stretch lines, they will not immediately update and the display is very slow, and then you may need to do a manual refresh to see the updated view.
The following combination works OK: MicroStation SS2 v08.11.07.443 Leica Cyclone 64 bit v07.03.03.00 Cloudworx v04.02.04.253
The following combination has a problem when modifying or manipulating MicroStation line work. The display is very slow and sometimes does not automatically update until a manual refresh is done : MicroStation SS3 v08.11.09.458 Leica Cyclone 64 bit v07.03.03.00 Cloudworx v04.02.04.253
A Bentley Cloudworx v220.127.116.110/Leica Cyclone v8.1.1 priority build has been released which fixes the problem. A commercial release of the product will be available on the Bentley Select Download site after it is completely certified. Please contact Bentley Support for information on how to receive the Bentley Cloudworx priority build v18.104.22.1680.