You are currently reviewing an older revision of this page.
Incomplete property sets when exporting to IFC and COBie.
Open the Project Configuration File for the project(s) concerned using a text editor (such as Notepad++), scroll to the bottom of the file and set the value of the IFC_PROJECT variable to include the appropriate property sets.
It is advisable to set this at the outset of a project so any of the properties that will be needed in later stage exports can be set early on. If additional property sets are included later in a project there may need to be an additional review of existing element properties to check for omissions.
The available settings are:
The default setting is delivered as IFC_PROJECT=0 to avoid IFC specific properties taking up space in the user interface when they are not needed.
Up to date information on the IFC Model View Definitions supported by AECOsim Building Designer can be found in the help documentation for the version that you are using.
Product TechNotes and FAQs
Building Product TechNotes And FAQs