You are currently reviewing an older revision of this page.
What is the difference between the Promote View and Demote View options in the View Attributes dialog and the and how can I make use of these tools?
In a Promoted View the elements contained in that view are resymbolized to their respective Family + Part assignments. This means, if the Part assigned to a wall defines level/ color 1 in the 3D Model, but is set to use level 2/color 2 along the Cut Plane and level 3/color 3 in the Forward View, then level 2/color 2 and level 3/color 3 is what you should see in the Promoted View. Once promoted, check the Building tab in the View Attributes dialog for the settings that will apply only to the Promoted version. For example, Drawing symbols and Unification.
Also, the configuration variable BB_DATASETTLEMENTS configuration variable should have a value of “1” in order to properly support Drawing Views.
In contrast, the Demote Views option removes all of the Saved View settings from the 3D model except for the Clip Volume itself.
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Comments or Corrections?
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this " Comments or Corrections?" section. THANK YOU!