Parametric Cell Studio properties for angle are not populated in the DataGroup property, that has been mapped to the PC Studio property.
After placement the DataGroup property is displayed as a "0" or Blank.
Solution:
After creating the Parametric cell and definition file in the definition editor, depending upon the organization, workspace, workset level
Go to the Datagroupsystem folder
Find out that .xsd file
Add :
<xs:simpleType name="bAngleUnitsType">
<xs:restriction base="xs:string"></xs:restriction>
</xs:simpleType>
Before the <xs:element…. Portion of the properties definition xsd.
Change:
type = “bAngleUnitsType”
Add:
default = “0”
And place the cell.
NOTE: If you experience issues missing DataGroup properties when publishing to an I-Model, you may need to temporarily disable the bAngleUnitsType property above. This data type was introduced in Update 3 for back-end purposes only so may affect certain downstream processes. It will be introduced as a normal Definition Editor data type in OpenBuildings Designer Update 5.