Known Issues

Steve Cocchi — Wed, 26 Feb 2020 22:14:41 GMT

Current Revision posted to OpenBuildings | AECOsim | Speedikon Wiki by Steve Cocchi on 2/26/2020 10:14:41 PM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

Structural Modeler RR3 Release [v 08.11.07.94]
PowerStructural Modeler [v 08.11.07.28]
Structural DocumentationCenter [v 08.11.07.29]

Tags: Structural DocumentationCenter, Structural Modeler, PowerStructural Modeler

Known Issues

denis.soreng — Mon, 21 Feb 2011 09:45:43 GMT

Revision 12 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 2/21/2011 9:45:43 AM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

Structural Modeler RR3 Release [v 08.11.07.94]
PowerStructural Modeler [v 08.11.07.28]
Structural DocumentationCenter [v 08.11.07.29]

Tags: Structural DocumentationCenter, Structural Modeler, PowerStructural Modeler

Known Issues

denis.soreng — Mon, 21 Feb 2011 09:45:43 GMT

Revision 13 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 2/21/2011 9:45:43 AM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

Structural Modeler RR3 Release [v 08.11.07.94]
PowerStructural Modeler [v 08.11.07.28]
Structural DocumentationCenter [v 08.11.07.29]

Tags: Structural DocumentationCenter, Structural Modeler, PowerStructural Modeler

Known Issues

Matt_P — Thu, 09 Sep 2010 02:42:49 GMT

Revision 11 posted to OpenBuildings | AECOsim | Speedikon Wiki by Matt_P on 9/9/2010 2:42:49 AM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]
Structural DocumentationCenter [v 08.11.07.29]

Tags: Structural Modeler, Structural DocumentationCenter, PowerStructural Modeler

Known Issues

Matt_P — Mon, 30 Aug 2010 02:46:06 GMT

Revision 10 posted to OpenBuildings | AECOsim | Speedikon Wiki by Matt_P on 8/30/2010 2:46:06 AM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]
Structural DocumentationCenter [v 08.11.07.29]

Known Issues

Steve Knipmeyer — Mon, 16 Aug 2010 13:08:52 GMT

Revision 9 posted to OpenBuildings | AECOsim | Speedikon Wiki by Steve Knipmeyer on 8/16/2010 1:08:52 PM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]
Structural DocumentationCenter [v 08.11.07.29]

Known Issues

Steve Knipmeyer — Mon, 16 Aug 2010 13:07:32 GMT

Revision 8 posted to OpenBuildings | AECOsim | Speedikon Wiki by Steve Knipmeyer on 8/16/2010 1:07:32 PM

The following are known issues with Structural Modeler, PowerStructural Modeler and Structural DocumentationCenter.

RAM Structural System

For the most complete integration with RAM Structural System, RSS version 14.02.02 should be installed on the same machine as your Structural product. When RAM Structural System is not installed, certain features may not be available or may have limited functionality: These include:
- The RAM 3D Viewer may not open and display RSS models properly.
- Dialog boxes with blank error messages may be displayed during import and export. In some cases, program crashes may be experienced.
- Some Wall and Slab elements (with particular types of openings) and some Braces may not import properly.
- The Verify tool in the Analysis Import dialog box may not add all Unknown Sections properly to the Structural section file.
Slabs assigned using "Whole Floor" assignment mode are not imported. Please refer to this Technical Note

Please note that these issues are being actively investigated and are expected to be resolved in a forthcoming maintenance release.

Current Versions

1. Structural Modeler RR2 Release [v 08.11.07.90]

2. PowerStructural Modeler [v 08.11.07.28]

3. Structural DocumentationCenter [v 08.11.07.29]

Known Issues

denis.soreng — Wed, 28 Jul 2010 15:44:24 GMT

Revision 7 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 3:44:24 PM

The following are the known issues with Structural Modeler and PowerStructural Modeler

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash when certain elements are present in the rss model.
The model is affected when Wall or Slab Openings and Bracings are present in the rss model.
Installing RAM Structural System on the machine will fix this issue.
RAM slabs assign using "Whole Floor" assignment mode not imported into Structural Modeler. Refer Technote >>

Latest Build

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]

Known Issues

denis.soreng — Wed, 28 Jul 2010 13:36:45 GMT

Revision 6 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 1:36:45 PM

The following are the known issues with Structural Modeler and PowerStructural Modeler

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash when certain elements are present in the rss model.
The model is affected when Wall or Slab Openings and Bracings are present in the model.
Installing RAM Structural System on the machine will fix this issue.
RAM slabs assign using "Whole Floor" assignment mode not imported into Structural Modeler. Refer Technote >>

Latest Build

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]

Known Issues

denis.soreng — Wed, 28 Jul 2010 13:36:20 GMT

Revision 5 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 1:36:20 PM

The following are the known issues with the Structural Modeler and PowerStructural Modeler

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash when certain elements are present in the rss model.
The model is affected when Wall or Slab Openings and Bracings are present in the model.
Installing RAM Structural System on the machine will fix this issue.
RAM slabs assign using "Whole Floor" assignment mode not imported into Structural Modeler. Refer Technote >>

Latest Build

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]

Known Issues

denis.soreng — Wed, 28 Jul 2010 13:34:29 GMT

Revision 4 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 1:34:29 PM

The following are the known issues with the Structural Modeler Refresh Release 2 [v08.11.07.90]

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash when certain elements are present in the rss model.
The model is affected when Wall or Slab Openings and Bracings are present in the model.
Installing RAM Structural System on the machine will fix this issue.
RAM slabs assign using "Whole Floor" assignment mode not imported into Structural Modeler. Refer Technote >>

Latest Build

Structural Modeler RR2 Release [v 08.11.07.90]
PowerStructural Modeler [v 08.11.07.28]

Known Issues with Structural Modeler RR2 Release [v08.11.07.90]

denis.soreng — Wed, 28 Jul 2010 13:26:51 GMT

Revision 3 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 1:26:51 PM

The following are the known issues with the Structural Modeler Refresh Release 2 [v08.11.07.90]

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash when certain elements are present in the rss model.
The model is affected when Wall or Slab Openings and Bracings are present in the model.
Installing RAM Structural System on the machine will fix this issue.
RAM slabs assign using "Whole Floor" assignment mode not imported into Structural Modeler. Refer Technote >>

Known Issues with Structural Modeler RR2 Release [v08.11.07.90]

denis.soreng — Wed, 28 Jul 2010 09:11:06 GMT

Revision 2 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 9:11:06 AM

The following are the known issues with the Structural Modeler Refresh Release 2 [v08.11.07.90]

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash.
Installing RAM Structural System on the machine will fix this issue.
RAM slabs assign using "Whole Floor" assignment mode not imported into Structural Modeler. Refer Technote >>

Known Issues with Structural Modeler RR2 Release [v08.11.07.90]

denis.soreng — Wed, 28 Jul 2010 07:55:42 GMT

Revision 1 posted to OpenBuildings | AECOsim | Speedikon Wiki by denis.soreng on 7/28/2010 7:55:42 AM

The following are the known issues with the Structural Modeler Refresh Release 2 [v08.11.07.90]

When RAM Structural System is uninstalled on machine and then Structural Modeler is installed then the RAM3DViewer that gets installed is unstable.
Using the RAM import/export in the scenario described above may result is some blank error messages and subsequent crash.
Installing RAM Structural System on the machine will fix this issue.