XML File not created

Shane Regan — Fri, 30 Jun 2023 13:39:16 GMT

Current Revision posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 6/30/2023 1:39:16 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Part L
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Not running the most up to date version

As the latest version of SBEM is required to produce an XML, please ensure you are running on the most up to date release of OpenBuildings Energy Simulator - see here.

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:
1.an internet connection
2.if you connect through a proxy, that details are entered in the LAN settings option
3.the firewall is allowing access to the Landmark Registry

4. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: OpenBuildings Energy Simulator, PartL, XML

XML file not created

Shane Regan — Wed, 03 May 2023 16:13:13 GMT

Revision 4 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 5/3/2023 4:13:13 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Part L
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Not running the most up to date version

As the latest version of SBEM is required to produce an XML, please ensure you are running on the most up to date release of OpenBuildings Energy Simulator - see here.

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

4. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: OpenBuildings Energy Simulator, PartL, XML

XML file not created

Shane Regan — Fri, 15 May 2020 13:38:22 GMT

Revision 3 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 5/15/2020 1:38:22 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Part L
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Not running the most up to date version

As the latest version of SBEM is required to produce an XML, please ensure you are running on the most up to date release.

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

4. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: OpenBuildings Energy Simulator, PartL, XML

XML file not created

Shane Regan — Tue, 12 May 2020 13:55:58 GMT

Revision 2 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 5/12/2020 1:55:58 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Part L
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Not running the most up to date version

As the latest version of SBEM is required to produce an XML, please ensure you are running on the most up to date release.

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

an internet connection
if you connect through a proxy, that details are entered in the LAN settings option
the firewall is allowing access to the Landmark Registry

4. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: OpenBuildings Energy Simulator, PartL, XML

XML file not created

Shane Regan — Tue, 12 May 2020 13:55:17 GMT

Revision 1 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 5/12/2020 1:55:17 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Part L
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Not running the most up to date version

As the latest version of SBEM is required to produce an XML, please ensure you are running on the most up to date release.

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

an internet connection
if you connect through a proxy, that details are entered in the LAN settings option
the firewall is allowing access to the Landmark Registry

4. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: OpenBuildings Energy Simulator, PartL, XML