"Error parsing Settings_Frames.xml" displays in the Message Center

Shreya Basu — Tue, 16 Aug 2022 07:23:32 GMT

Current Revision posted to OpenBuildings | AECOsim | Speedikon Wiki by Shreya Basu on 8/16/2022 7:23:32 AM

	Product(s):	OpenBuildings Designer
	Version(s):	CONNECT Edition
	Area:	Configuration
	Subarea:	Error

Problem

While launching OpenBuildings Designer the error message below is displayed in the Message Center.

Solution

First, browse to the "Setting_Frames.xml" which is by default located in your dataset's \Setting folder, for example:

C:\ProgramData\Bentley\OpenBuildings CONNECT Edition\Configuration\Datasets\Dataset_NM\Setting\

Now open the file using a text editor such as Notepad ++, and remove the start tag:

<Frame name=”.

Then save the file.

After that when you launch OpenBuildings Designer you should no longer see the error message above.

Tags: CONNECT Edition, OpenBuildings Designer, Message Center, XML, Configuration

"Error parsing Settings_Frames.xml" displays in the Message Center

Steve Cocchi — Fri, 12 Aug 2022 15:40:25 GMT

Revision 2 posted to OpenBuildings | AECOsim | Speedikon Wiki by Steve Cocchi on 8/12/2022 3:40:25 PM

	Product(s):	OpenBuildings Designer
	Version(s):	CONNECT Edition
	Area:	Configuration
	Subarea:	Error

Problem

While launching OpenBuildings Designer the error message below is displayed in the Message Center.

Solution

First, browse to the "Setting_Frames.xml" which is by default located in your dataset's \Setting folder, for example:

C:\ProgramData\Bentley\OpenBuildings CONNECT Edition\Configuration\Datasets\Dataset_NM\Setting\

Now open the file using a text editor such as Notepad ++, and remove the start tag:

<Frame name=”.

Then save the file.

After that when you launch OpenBuildings Designer you should no longer see the error message above.

Tags: CONNECT Edition, OpenBuildings Designer, Message Center, XML, Configuration

Error message popped up in Message Center due to ‘Settings_Frames.xml’

Shreya Basu — Wed, 29 Dec 2021 12:52:31 GMT

Revision 1 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shreya Basu on 12/29/2021 12:52:31 PM

	Product(s):	OpenBuildings Designer
	Version(s):	Update 8
	Environment:	N/A
	Area:	Workspace
	Subarea:	Configuration

Problem

While opening OBD sometimes this error message was shown in Message Center. The cause of the error message is due to some malfunction occurring in the ‘Settings_Frames.xml’ files.

Solution

First, go to the ‘Setting_Frames.xml’ which is located in the Setting folder (lies in this path),

C:\ProgramData\Bentley\OpenBuildings CONNECT Edition\Configuration\Datasets\Dataset_NM\Setting (we have did it for NM DataSet for example)

Now open the XML through Notepad ++. The remove the start tag,

<Frame name=”.

Then save the file.

After that when you will again open OBD you will find that the error message has gone.

Tags: CONNECT Edition, OpenBuildings Designer, Message Center, XML, Configuration