Internal Surfaces Heat Flow Types

Sayan Acharyya — Mon, 11 Dec 2023 12:32:42 GMT

Current Revision posted to OpenBuildings | AECOsim | Speedikon Wiki by Sayan Acharyya on 12/11/2023 12:32:42 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article shows how to change the Heat Flow associated to the partitions in your building energy model.

Method

To change the Heat Flow Type, or disregard internal heat transfer, open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms. (To learn more about adjacency, refer to the wiki article here).

Should you wish, you can manually overwrite this via various options as below:

In order to disregard or ignore internal heat transfer, select None from the above dropdown list.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer

Internal Surfaces Heat Flow Types

Arindam Roy — Fri, 29 Sep 2023 14:09:46 GMT

Revision 6 posted to OpenBuildings | AECOsim | Speedikon Wiki by Arindam Roy on 9/29/2023 2:09:46 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article shows how to change the Heat Flow associated to the partitions in your building energy model.

Method

To change the Heat Flow Type, or disregard internal heat transfer, open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms. (To learn more about adjacency, refer to the wiki article here).

Should you wish, you can manually overwrite this via various options as below:

In order to disregard or ignore internal heat transfer, select None from the above dropdown list.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer

Internal Surfaces Heat Flow Types

Shane Regan — Fri, 29 Sep 2023 11:02:50 GMT

Revision 5 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 9/29/2023 11:02:50 AM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article shows how to change the Heat Flow associated to the partitions in your building energy model.

Method

To change the Heat Flow Type, or disregard internal heat transfer, open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms. (To learn more about adjacency, refer to the wiki article here).

Should you wish, you can manually overwrite this via various options as below:

In order to disregard or ignore internal heat transfer, select None from the above dropdown list.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer

Disregard Internal Heat Transfer

Shane Regan — Fri, 29 Sep 2023 11:01:40 GMT

Revision 4 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 9/29/2023 11:01:40 AM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article shows how to change the Heat Flow associated to the partitions in your building energy model.

Method

To change the Heat Flow Type, or disregard internal heat transfer, open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms. (To learn more about adjacency, refer to the wiki article here).

Should you wish, you can manually overwrite this via various options as below:

In order to disregard or ignore internal heat transfer, select None from the above dropdown list.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer

Disregard Internal Heat Transfer

Shane Regan — Fri, 04 Feb 2022 15:50:41 GMT

Revision 3 posted to OpenBuildings | AECOsim | Speedikon Wiki by Shane Regan on 2/4/2022 3:50:41 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article would show you how to change the heat-flow types through the partitions of your building energy model.

Method

Users might require to disregard internal heat transfer while calculating heat gain calculations for their energy model. To do that,

Open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms.

In order to disregard or ignore internal heat transfer, select none from the dropdown list. This would keep the software from considering heat flowing between adjacent rooms.

To learn more about adjacency, refer to the wiki article here.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer

Disregard Internal Heat Transfer

Krishnendu Paul — Fri, 04 Feb 2022 13:39:20 GMT

Revision 2 posted to OpenBuildings | AECOsim | Speedikon Wiki by Krishnendu Paul on 2/4/2022 1:39:20 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article would show you how to change the heat-flow types through the partitions of your building energy model.

Method

Users might require to disregard internal heat transfer while calculating heat gain calculations for their energy model. To do that,

Open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms.

In order to disregard or ignore internal heat transfer, select none from the dropdown list. This would keep the software from considering heat flowing between adjacent rooms.

To learn more about adjacency, refer to the wiki article here.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer

Disregard Internal Heat Transfer

Krishnendu Paul — Fri, 04 Feb 2022 12:29:40 GMT

Revision 1 posted to OpenBuildings | AECOsim | Speedikon Wiki by Krishnendu Paul on 2/4/2022 12:29:40 PM

	Product(s):	OpenBuildings Energy Simulator
	Version(s):	CONNECT Edition
	Environment:	N/A
	Area:	Building Modelling
	Subarea:	N/A

Overview

This article would show you how to change the heat-flow types through the partitions of your building energy model.

Method

Users might require to disregard internal heat transfer while calculating heat gain calculations for their energy model. To do that,

Open the properties section of a partition wall.

If the heatflow type is selected as Adjacent room, that defines the wall would allow heat to flow through to the adjacent rooms.

In order to disregard or ignore internal heat transfer, select none from the dropdown list. This would keep the software from considering heat flowing between adjacent rooms.

To learn more about adjacency, refer to the wiki article here.

Tags: adjacency, energy simualtor, OpenBuildings Energy Simulator, heat transfer