Toggling on 2D display only for electrical component in design model

Problem Description

How can you toggle on 2D display only for electrical elements in your design while working with OpenBuildings Designer?

Steps to Accomplish

Please refer to the below mentioned steps to achieve the same.

1. At first, you have placed some electrical component in your design model (in this case Raceway was placed).

2. Then from the electrical ribbon under eye type icon there is a drop down showing you the list of options available for display of electrical components as shown in the screengrab below.

3. From that list select the Display 2D only option and click on the electrical component and you can see that the element is displayed in 2D as shown in the screengrab below.