While modifying pipes OBD is crashing

Problem Description

After placing some pipes when you are changing the name of the same pipes from the Catalog Editor and after that when trying to modify its properties OBD is crashing. How to fix the crash?

Steps to Accomplish

Please follow the below steps through which you can fix the crashing of OBD and modify the pipes.

1. When you are changing the name of the pipes after placing it in the design model that means the now the catalog items are not mapped properly.
   
   
2. So, from File go to Utilities > Data Utilities > DataGroup Transformation Utility and open the tool.

3. Upon running the DataGroup Transformation Utility tool you can see that there will be some catalog items (in this case Pipe was used) which are not mapped properly after changing their name and that was the root cause of the crashing of OBD while trying to modify the elements.

4. After that you will have to map those catalog items to their Destination Catalog and Destination Catalog Instance successfully.

5. Upon matching those catalog items, please run the Schema Upgrade Utility tool, save the file, and close it.
   
   
6. Finally, after reopening the file when you will now try to modify the property of the elements you will be able to do so without any issues.