While cutting any profile or cutting the solid into several pieces the ‘Features’ have been added to the solid. Sometimes some feature that might have been placed wrongly on the object obstructs the cutting tool.
In such a case 2 things can be done. 1. Deleting the particular ‘Feature’ which creates the issue 2. Move the feature to extreme down in the feature list in Building Element Infor under the ‘Feature’ tab. First method-
Click on the ‘Building Element Info’ tool from the ‘Common Tools’ section.
Then click on the problematic solid. Then you will get the ‘Building Element Info’ toolbox.
From there click on the ‘Features’ tab. Then select the problematic feature from the list and then apply ‘Drop to Solid’. Then finally click on ‘Apply’.
After doing so the problematic solid will be removed from the sold and the ‘Cut by Solid’ tool can again be used. Second method
This method is only recommended when due to some obligations the problematic solid can not be removed. There it is been needed to select the particular feature and click on the ‘Move Down’ button till it becomes the last one from the list.
Then again you can use the ‘Cut Solid by Curve’ tool.