Product(s):	OpenBuildings Designer
	Version(s):	CONNECT Edition
	Area:	Grid Systems
	Subarea:

 

Problem

If I add a new floor or new reference plane from the Floor Manager and then select it from the Set Active Floor dropdown, no Grid displays for it.

Solution

Whenever a floor or reference plane is added to the floor system, the Grid Systems Manager must be opened, and the Start Floor and End Floor dropdown options must be reset (or adjusted as per requirements).

Then, if the new floor or reference plane is selected from the Set Active Floor dropdown, the grid system for it will be visible.

Please refer to the video below for more insights on the problem and solution.

See Also

Setting up the Floor Manager before creating a Grid System - OpenBuildings | AECOsim | Speedikon Wiki - OpenBuildings | AECOsim | Speedikon - Bentley Communities