RE: Room height in design

FairClough — Thu, 27 Aug 2015 15:50:27 GMT

Sorry for the late reply guys been fire fighting all day, i will go through this tomorrow morning, thank you both once again

RE: Room height in design

Stephen Brown — Thu, 27 Aug 2015 11:05:41 GMT

Hi,
Just a follow up that there seems to be an issue with how your account name displays. I have logged a Help Request to get this resolved so your account name displays correctly.

RE: Room height in design

Duncan Brown — Thu, 27 Aug 2015 10:23:23 GMT

Hello

There are a couple of things that can help with setting up wall heights.

The first is to set your wall heights before you draw the room using the defaults option.

Any information you enter in here will be used to define the next, and consequent rooms.

If you find you have a room with incorrect wall heights, then you can use the global option to select rooms and change the heights therein

Finally, as you continue with your building, you will likely need to place a roof. In the Roof/floors option you will find the facility to extend wall heights to the underside of ceilings, and all so a 'setup intermediate floors' option. The intermediate floors option will extend walls to the next level, and the extend wall heights option will ensure your walls extend into the roof line correctly.

An example of the Extend Walls option being used to ensure walls extend up into the pitch of the roof: