Floor Level Correction -

Question

I have added a new DXF file representing the second floor, but have inadvertently entered an incorrect floor height. Is there any way that I can re-enter the correct floor height?.

Shane Regan · Accepted Answer

Hi Chris, 
 The workflow will be slightly different in Netsys but the same principle applies. I would suggest the following: 
 *Create a new floor and bring in your DXF at the correct floor height 
 *Go to Floors>Copy Services from another floor , and copy the services from the completed floor at incorrect height, to the new one at the correct height. 
 *Once all the data has been copied, go to Floors>Delete Floors , and delete the original incorrect floor. 
 In relation to your issue deleting floors; I have tested this here and I believe I see what you mean - when you click on Floors>Delete floor , a window saying 'OK to Close?' is displayed. This should not be occurring and I will log this with our developers. To get around this simply click on cancel and you will be brought to the 'Select floor to delete screen', as below.

Stephen Brown · Answer

The workflow for correcting a finished floor level can be found in our Support Solutions here: 
 http://communities.bentley.com/products/building/performance/w/building_performance__wiki/11959.changing-floor-heights