Floor Level Correction -

Hi Chris,

The workflow will be slightly different in Netsys but the same principle applies. I would suggest the following:

*Create a new floor and bring in your DXF at the correct floor height

*Go to Floors>Copy Services from another floor, and copy the services from the completed floor at incorrect height, to the new one at the correct height.

*Once all the data has been copied, go to Floors>Delete Floors, and delete the original incorrect floor.

In relation to your issue deleting floors; I have tested this here and I believe I see what you mean - when you click on Floors>Delete floor, a window saying 'OK to Close?' is displayed. This should not be occurring and I will log this with our developers. To get around this simply click on cancel and you will be brought to the 'Select floor to delete screen', as below.

Changing Floor Height - I have read and understood this action for CAD input, however, my problem has arisen using Netsys pipework, I have imported a DXF file and inadvertently used the wrong floor height, I cannot find any method of rectifying this and to make matters worse, I have tried deleting the floor level and when I do so there is no response. Chris Knell

The workflow for correcting a finished floor level can be found in our Support Solutions here:

http://communities.bentley.com/products/building/performance/w/building_performance__wiki/11959.changing-floor-heights