Hevacomp: a question about how to create.

Question

Hello, 
 I would like to ask a question about the setting floor for each room. 
 Could you please let me know how create individually the thickness of a floor for each room. 
 Conditions folowing as; 
 1. no using a file of roof.dxf 
 2. possible or impossible to change individually the thicknes of a floor for each rooms within the icons of CAD input or MAT. 
 Please reply to help me asap.

Shane Regan · Answer

Hi Shiro, 
 No problem at all. The workflow you mention above should work fine, or if you have a number of different surfaces that need to be changed then the Global option would be useful, e.g.:

If you are unsure as to whether the surfaces are then defined correctly, you can view each rooms properties by using Print:

Shane Regan · Answer

Hi Shiro, 
 There is no trial version of the software, only a trial license and this will have no affect on these matters. I'm not completely sure what the issue is here however I will try to address each of your points in turn: 
 *It shows the Floor type button is unchangeable within CAD input >Rooms>Change surface - If you are referring to the menu below, then the software is working as it should. You cannot change the ceiling/floor type on this menu. You must instead do this on the Roof/floors menu. 
 
 *It could not be reflected the result within Design database>Print>Display/Print neither - The celing and floor types specified as below will be displayed in the Print report, after clicking on 'Set up intermediate floors'. 
 
 *Any types of ceilings and floors (internal floors included) could not been changed for setting up - Are you referring to the menu as in screenshot above? If you click in the 'Intermediate ceiling type' box a list of ceiling types will be displayed. 
 
 I hope the above helps. Should you have any further queries I will need to see screenshots showing exactly what your issue is, and potentially a copy of your project. Please let me know if you have any questions.