Hi,
Please would someone be able to help me. I have been trying to complete an SBEM for a client and this one part of the BRUKL document won't show up when I run the compliance section of the Part L in Hevacomp.
On the roof of the building in question there is 1 solar thermal panel. When myself and my colleagues tried to input the data for this in the Part L of Hevacomp and then run the compliance to get the BRUKL document, nothing shows up under the 'Energy Production by Technology [kWh/m3]' table. The solar thermal system is just not showing up with anything, yet it is picking up our solar PV. What myself and 2 of my colleagues don't understand is why this is not showing up on the document. We have been fiddling around with all the settings and data in the Part L of Hevacomp and I have followed this how to page from Bently: http://communities.bentley.com/products/building/performance/w/building_performance__wiki/24566.solar-collectors but it's still not showing up on the document and it's infuriating.
Please can someone advise on how to do this please.
Thank you.
Good afternoon,
Could you please clarify if you are looking to model Solar Collectors or a Solar Thermal System for your HWS?
Shane Regan | Principle Building Performance Support EngineerHevacomp to OpenBuildings - A complete guide for every user | Bentley Communities