Hi,
Please would someone be able to help me. I have been trying to complete an SBEM for a client and this one part of the BRUKL document won't show up when I run the compliance section of the Part L in Hevacomp.
On the roof of the building in question there is 1 solar thermal panel. When myself and my colleagues tried to input the data for this in the Part L of Hevacomp and then run the compliance to get the BRUKL document, nothing shows up under the 'Energy Production by Technology [kWh/m3]' table. The solar thermal system is just not showing up with anything, yet it is picking up our solar PV. What myself and 2 of my colleagues don't understand is why this is not showing up on the document. We have been fiddling around with all the settings and data in the Part L of Hevacomp and I have followed this how to page from Bently: http://communities.bentley.com/products/building/performance/w/building_performance__wiki/24566.solar-collectors but it's still not showing up on the document and it's infuriating.
Please can someone advise on how to do this please.
Thank you.
Here is what my Part L looks like:
And this is my BRUKL document that isn't showing anything:
Shane Regan | Principle Building Performance Support Engineer
In that case I will need to take a look at the project to determine the reason for this.
To send your project please exit Hevacomp, zip the project folder and either attach it to this forum thread, or upload privately as described here
Alternatively, if you wish to discuss your project in a more private manner then you can log a Service Request and attach the project file, via the following link here.