How do you use Energy Simulator to do a residential cooling load, unit sizing and duct sizing?https://communities.bentley.com/products/building/performance/f/hevacomp-forum/118470/how-do-you-use-energy-simulator-to-do-a-residential-cooling-load-unit-sizing-and-duct-sizingHas anyone been able to use Energy Simulator to get a heating and cooling load, unit size and duct size calculations for a single family residential house? The IECC requires Manual J, Manual S, and Manual D or other approved calculations for plans onen-USTelligent Community 12RE: How do you use Energy Simulator to do a residential cooling load, unit sizing and duct sizing?https://communities.bentley.com/thread/365348?ContentTypeID=1Tue, 26 Apr 2016 09:57:00 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:52b038bf-a84a-46cb-880c-60543f31f753Duncan BrownLoren - AECOsim Energy Simulator (AES) is primarily geared towards commercial buildings. The embedded AHSRAE 90.1 and 62.1 calculations generally apply to commercial buildings and to multi-family buildings that are multi-storey. While AES does include other cooling and heating load calculations from ASHRAE book of fundamentals, they differ considerable from the Manual J residential load calculations.<br /> <br /> At this time Manual D, J and S are not in the development cycle.<br /> <br /> Best regards,<div style="clear:both;"></div>