EPC error

RE: EPC error

Shane Regan — Fri, 18 Aug 2017 12:30:12 GMT

Hi Josh,

Great, thanks for letting me know. SBEM has a limit as to the amount of surfaces/zones it can process, however running zones cumulatively in this manner can often assist. You may also wish to consider room multipliers should this occur in future, further info here.

RE: EPC error

Josh Healey — Fri, 18 Aug 2017 11:45:13 GMT

Thanks for your help Shane,

I tried selecting and producing an epc for each zone which worked fine then selected all zones to produce an epc which has now been successful.

RE: EPC error

Shane Regan — Fri, 18 Aug 2017 09:52:32 GMT

Thanks for the project Josh,

However I cannot reproduce the above error as of yet. Are you selecting all rooms before clicking on EPC? I note there are quite a lot of rooms in this project so SBEM may be struggling with this. Could you please try just selecting one room and see if the error persists?

RE: EPC error

Shane Regan — Fri, 18 Aug 2017 09:04:02 GMT

Hi Josh,

Could you please forward the project so I can take a closer look? Please zip the project folder and upload to here.

Thanks,
Shane