No flow error on multi level Project

RE: No flow error on multi level Project

Duncan Brown — Wed, 15 Aug 2018 12:07:17 GMT

That's good news!

I suspect there was a 'broken' FCC at that point or a damaged connection node. You should be ok as long as you don't place anything there.

Regards,

RE: No flow error on multi level Project

Wayne Scott — Wed, 15 Aug 2018 12:02:39 GMT

Hi Duncan,

Thank you for your help that worked!

Very much relieved I don't have to start again..

Many Thanks

RE: No flow error on multi level Project

Duncan Brown — Tue, 14 Aug 2018 15:48:03 GMT

If you try placing he FCC in a slightly different location, does the error occur then?

Regards,

RE: No flow error on multi level Project

Wayne Scott — Tue, 14 Aug 2018 15:40:46 GMT

Hi There,

No they disappear..

Many Thanks

RE: No flow error on multi level Project

Duncan Brown — Tue, 14 Aug 2018 15:35:33 GMT

After deleting the floor change connector on both floors, do you still see the floor change connector after refreshing the screen?

RE: No flow error on multi level Project

Wayne Scott — Tue, 14 Aug 2018 15:32:09 GMT

Hi There,

I've just noticed when I start the riser pipe from the floor connector I get an error message runtime error '6' Overflow?

Is this an error which could be causing the issue?

I've tried group deleting the pipes around the riser on every floor, I've deleted the services on floor 3 and changed them with floor 2 still no change.

Any more tips??

Many Thanks

RE: No flow error on multi level Project

Duncan Brown — Tue, 14 Aug 2018 15:01:45 GMT

It would be unlikely. Please try the methods I posted.

Regards,

RE: No flow error on multi level Project

Duncan Brown — Tue, 14 Aug 2018 14:31:00 GMT

Hi Wayne - this would suggest that you have an extra pipe section in the riser that is connecting into another section, or that you have drawn the FCC incorrectly. As you appear to have been successful with the 10 floor riser, it would indicate the first part.

You should try and group delete the FCC and riser pipes, and pipes connecting into the risers on both floors. Refresh the screen and view both floors, and the isometric, to ensure there are no sections of pipe or FCC indicators in the are. Then draw the connecting pipes and riser/FCC back in.

Regards,

RE: No flow error on multi level Project

Wayne Scott — Tue, 14 Aug 2018 14:29:54 GMT

Hi,

I've just noticed the second floor is the only floor to automatically connect to the floor connector between first and ground floors. could it be something to do with a change in fitting type?

Many Thanks