Hi Guys,
I'm working on a large Part L model which is having an issue with high heating energy consumption. In the BRUKL report the glazing U-values are sitting at 5.6 but the glazing in fabric data is set to 1.1. I have checked the glazing through CAD input, global change and reset the calc on the Part L software. Would you be able to take a look at it for me?
Thanks
Andrew.
Hi Shane,
Thanks for getting back to me.
I had checked everything else apart from the fabric data section. The windows should've been set to 1.1 instead of 5.6, so I've fixed my error.
Thanks again,
Andrew
Hi Andrew,
No problem at all, please get in touch should you need anything else.
Shane Regan | Principle Building Performance Support Engineer