SHOW PUMP DUTY RESULT HWS

RE: SHOW PUMP DUTY RESULT HWS

Shane Regan — Wed, 08 May 2019 11:14:05 GMT

Hi, thank you for uploading the smaller file. I have downloaded this and will contact you via a Service Request shortly.

RE: SHOW PUMP DUTY RESULT HWS

GL — Tue, 07 May 2019 15:52:49 GMT

HI SHANE

THE LARGE SIZE OF THE FILE IS DUE TO DXF FILE.

RE: SHOW PUMP DUTY RESULT HWS

Shane Regan — Tue, 07 May 2019 15:51:36 GMT

Hi, the zip file is 200 MB, is this correct? This is very large for just a Netsys project - they would usually only be a few KB. Could you please just upload the HWS folder?

RE: SHOW PUMP DUTY RESULT HWS

GL — Tue, 07 May 2019 15:42:19 GMT

SHANE

I HAVE SENT A LINK WITH THE FILE. THE ABOVE DISCUSSED PROJECT IS UNDER HWS FOLDER.

THANKS

RE: SHOW PUMP DUTY RESULT HWS

Shane Regan — Tue, 07 May 2019 15:12:53 GMT

I have checked the link and it is working fine here, you may need to consult your IT about your browser permissions.

RE: SHOW PUMP DUTY RESULT HWS

GL — Tue, 07 May 2019 14:33:23 GMT

SHANE

THANKS FOR THE LINK BUT IT DOES NOT OPEN UP; IT MIGHT BE DUE TO INTERNAL SECURITY SYSTEM HERE AT MY END. IS THERE OTHER WAY TO SEND YOU THE FILE.

RE: SHOW PUMP DUTY RESULT HWS

Shane Regan — Tue, 07 May 2019 14:05:55 GMT

Could you please upload the project folder to this link and I will take a look.

RE: SHOW PUMP DUTY RESULT HWS

GL — Tue, 07 May 2019 13:20:01 GMT

HI SHANE

THIS IS INFACT FLOW AND RETURN SYSTEM AS PICTURED BELOW.

ALSO, TO AVOID ADDITIONAL OUTLET PRESSURE IN CIRCULATING PUMP I HAD FOLLOWED BELOW PROCESS, HOWEVER THE OUTLET PRESSURE ARE ADDED.

communities.bentley.com/.../pipe-sizing---outlet-resistance-is-considered-in-circulating-pump-sizing

PLEASE COULD THIS BE CLARIFIED.

REGARDS

RE: SHOW PUMP DUTY RESULT HWS

Shane Regan — Tue, 07 May 2019 13:04:14 GMT

Hi, this refers to the Return pump. I would suspect that your system is flow only. If you instead size a Flow and Return system it will display these results.