Heat Gain Simulation reading No solar input

RE: Heat Gain Simulation reading No solar input

Shane Regan — Thu, 29 Aug 2019 12:52:55 GMT

Hi David,

I have set up the roofs and the simulation is showing solar gains as below:

I note you have two roof drawings so you need to ensure you omit the irrelevant rooms, ie:

1 - Tiled roof:

then,

2 - Glass roof:

RE: Heat Gain Simulation reading No solar input

David Forster — Thu, 29 Aug 2019 09:57:38 GMT

Thanks Shane

The file has been uploaded

RE: Heat Gain Simulation reading No solar input

Shane Regan — Thu, 29 Aug 2019 09:04:51 GMT

Hi David, could you please forward the project folder to the following link and I will take a look: https://bentley.sharefile.com/r-rfb4f9bf8e634ef18

RE: Heat Gain Simulation reading No solar input

David Forster — Thu, 29 Aug 2019 08:48:58 GMT

Hi Shane

Thanks for your quick response, this did not however solve the issue.

Do you have any further advise?

Thanks

David

RE: Heat Gain Simulation reading No solar input

Shane Regan — Thu, 29 Aug 2019 08:40:59 GMT

Hi David,

I would firstly advise setting up your roof again to ensure that the current roof surfaces are being taken into consideration. Please then try the simulation once more.