Changing the data in my Hevacomp model is fine and get a different set of results in the results tab page. The compliance document however has not modified inline with the data changes and remains at the previous revision.
No parts of the model have been put as shell and core & have tried exiting the model once the changes have been made and re-entered the model to run and nothing again changes?
Is there anything I can do so the BRUKL alters to the data inputted? I haven't had this issue before.
The BRUKL calculation may be failing to complete and reverting back to the previous one, stored in the project folder. Could you please try regenerating the calc completely by running for one single room, and then again for all rooms?
Shane Regan | Senior Building Performance Support Engineer
I have ran a single room then all rooms and it sticks to the original previous calculation. Nothing has changed at all so assuming it is not completing the calc in full?
The results actually change as desired but its the actual compliance report that remains as the previous one.
Thanks for checking that Josh. If you could please forward the project I will investigate this further for you. I will send you an email shortly with further details.
I have uploaded the projects to the link sent to me.
Thanks Josh, will get back to you as soon as I have any info.