RE: Copy/Add/Rename a room on Room Data

Shane Regan — Wed, 17 Nov 2021 16:39:15 GMT

Hi Carlo,

Room Data mode and CAD Input mode are not interchangeable - only one should be used. For instance adding a room via Room Data only provides the basic properties of the room and will contain no information in relation to the geometry required by a CAD model. Such rooms will not be found in CAD input.

When entering Room Data you will have seen the below - this step should be treated with caution according to the text highlighted:

To avoid any unintended model inputs I would personally recommend using only CAD Input for future projects. I hope this helps to clarify, if you have any other questions please let us know.