Hi this is Riya from Inox Steel India.
I haven't used Hevacomp in a long time, so please excuse any trivial questions.
I'm attempting to model a relatively large project, and I've already placed all of my emitters (some ceiling void, some floor level).
When I try to connect the emitters using separate flow and return pipework, it appears that the emitters are not connecting. Zooming in reveals that the grid does not always appear to line up with the connection point of the emitters, as I've modelled some of them at 45 degrees (see figure below). I've tried checking this in the isometric view, but due to the large building, it is difficult to check. Is it acceptable to model the emitters at 45 degrees? Is there one?
Hi Riya,
It sounds like it would be useful for you to go through our related training which goes through such systems in depth - you can find this here.
Should you need more specific guidance on this particular project please log a service request here and I would be happy to help.
Regards,
Shane
Shane Regan | Principle Building Performance Support EngineerHevacomp to OpenBuildings - A complete guide for every user | Bentley Communities