• Netsys Heating Pipe Sizing - Emitter Questions

    Hi this is Riya from Inox Steel India . I haven't used Hevacomp in a long time, so please excuse any trivial questions. I'm attempting to model a relatively large project, and I've already placed all of my emitters (some ceiling void, some floor level…

  • Calculations - Occupancy and heat gains

    What takes precedence for people gains - is it the Standard room input data, or the definition of activity types? VS. The activity types are referenced below are from this thread: https://communities.bentley.com/products/building/performance/w/building_performance__wiki…

  • CIBSE Gain Queries

    I have turned off infiltration, ventilation, occupants and casual gains from my model to test the solar load portion only. However I still see loads attributed with "Convective" and "Latent" (albeit small). Should these loads exist in my calculation…

  • Validation

    I'm new to Hevacomp and looking to find out: 1. Is the Heat Loss and CIBSE Gain elements of Hevacomp v8i validated in accordance with CIBSE TM33? 2. Is there a list of the standards that CIBSE is validated against? Thanks in advance.

  • CIBSE Gain calculation - Importance of accurate input data

    Product(s): Hevacomp Version(s): V8i Environment: N/A Area: Design Database Subarea: Results Overview Unusual results are likely to occur if Building model data is inadequate. Method Comprehensive…

  • RE: Window glazing properties, CIBSE Gain

    Hi Kenny, The different standards used by each Hevacomp calculation prescribe their own equations, each requiring their own particular variables. In the case of the CIBSE Gain calc the most important variables are the Solar Gain Factors. SHGC is not…

  • CIBSE Gain - Temperature rise

    I understand that you get different heat gains in the following scenarios: Within CIBSE gain tool allow temperature to rise by 1degC Within room data increase summer design temp by 1degC There is a calculation procedure for the first scenario…

  • Limitations, assumptions and approximations of Hevacomp, particularly CIBSE Gain

    I am wondering if you could help point me in the right direction. I am wanting to better understand what are the limitations of Hevacomp in terms of the underlying assumptions and approximations that the software uses. I am mostly interested in the…

  • Glazing database - effect of adding blind on G value and Shading co-efficient - CIBSE Gain

    I have created a new glazing type for use in the CIBSE Gain tool. Now I want to create a second glazing type which includes a blind. I have used the calculations in the CIBSE solar gain factor guide and modified all of the solar gain factors accordingly…

  • CIBSE Gain Calculation - Why does the graph show double the table results?

    Product(s): Hevacomp Mechanical Designer Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview When producing results in the CIBSE Gains program, the graph is showing double…

  • RE: Discrepancies between result table and graph

    Hi Gary - With regards your query, this document should provide you with an answer. Best regards,

  • Discrepancies between result table and graph

    Using CIBSE Heat Gain to show solar gains and fabric loss I have noticed that the graph does not match the results table for one of my rooms. Instead the results in the Graph of the are roughly double the values in the table. Any ideas as to why this…

  • Very high CIBSE Solar Gains

    I modelled a simple 5mx5m glass box with no heat transfer across the floor or ceiling and I created a custom glass to replicate a Pilkington glass (U-Value of 0.6 and g-factor of 0.55). When I checked the solar gains using CIBSE Gains they were 10.8kW…

  • RE: CIBSE Gain - Results Breakdown

    Matthew, you have probably turned on Temperature Rise in the Design Data tab. When you use Temperature Rise the individual loads are combined in the underlying equations and cannot be accurately split out afterwards.

  • CIBSE Gain calculation - Solar gains at night

    Product(s): Hevacomp Mechanical Designer Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview CIBSE Gain results can often display Solar Gains at night, for example: Explanation…
Communities
Support and Services
Training and Learning
Social Media