• The roof changes the walls' and room's height

    Hi there, I use the Hevacomp V8i SS1 SP2. I build the envelope, but when I set up the roof, it automatically changes the height of the walls and the room. How can I avoid this? Thanks!

  • Setting up a room under a roof

    Hi, Bit of a tricky situation. I have been trying to model a small server room in an existing loft space. (quick revit model attached to show the plan with roof removed). I am having some issues when setting up the roof level. I have modelled the…

  • CAD Model Design - Roof changes not reflected in model

    Product(s): Hevacomp Mechanical Designer Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Problem Changing the roof type in Floors/Roofs isn't reflected in the model. Solution…

  • RE: Two internal ceilings when I add a roof.

    Hi Tony, You need to use the Setup Exposed Roofs command to connect your roof surfaces to the rooms below. This article may be of assistance.

  • RE: Deleting Roof

    Should any other users require further guidance on roof design then please see this article .

  • Roof light heat losses

    Hi everyone I have created a roof section with some roof lights. When running the heat losses it seems that there is not heat losses through the roof lights. Any ideas? Regards Jesus

  • CAD Model Design - Adding different roof section types

    Product(s): Hevacomp Design Database Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview The roof construction fabric can be changed as you are adding roof sections. Method…

  • RE: Issues Adding Roofs

    Please note that further guidance on setting up roofs can be found here. Also, guidance on how best to model stepped floors can be found here.

  • How to Resolve the Run time error 11 when I try to view a model in 3D or Place a Roof

    When ever try to generate a 3D view of the object, whether that is using the 3D view tool or the roof tool, the software crashes and i get the message of run time error 11 Division by 0. Is there a way of solving this? Is it a Hardware or Software…
Communities
Support and Services
Training and Learning
Social Media