Bentley Communities

Hevacomp Energy Assessor course and exam - London, May 2018

Shane Regan

Hevacomp Energy Assessor (Non-dwelling) Level 3 & 4 (SBEM) Allows Hevacomp users - via an accredited Energy Assessor scheme provider - to work towards Energy Assessor status to show competency in production of EPC's using an approved SBEM interface…

over 5 years ago
Hevacomp
Hevacomp Blog

Hevacomp Part L Energy Assessor course and exam - September 2017

Shane Regan

Hevacomp Energy Assessor (Non-dwelling) Level 3 & 4 (SBEM) Allows Hevacomp users - via an accredited Energy Assessor scheme provider - to work towards Energy Assessor status to show competency in production of EPC's using an approved SBEM interface…

over 6 years ago
Hevacomp
Hevacomp Blog

RE: HVAC Systems - Zones

Shane Regan

Hi Matt, I would firstly advise caution if you are intending to use Part L to determine if natural ventilation is required, as SBEM is not a design tool indicative of real-world conditions. (To see if natural ventilation is required you would need to…

over 6 years ago
Hevacomp
Hevacomp Forum

RE: Update to Hevacomp PartL for SBEM 5.3.a

Shane Regan

Just to follow up on the above; should any other users be seeking information about the pending Update, please note that all developments will be immediately announced here .

over 6 years ago
Hevacomp
Hevacomp Forum

Hevacomp Part L, SBEM update 5.3.a and 4.1.g

Shane Regan

Changes to the SBEM calculation were recently introduced, mainly to incorporate new constructions from the updated NCM modelling guides. Thus, Energy Performance certificates and Compliance documents must now be generated with: SBEM 5.3.a - for Part…

over 6 years ago
Hevacomp
Hevacomp Blog

District heating is displayed in BRUKL report, none selected

Shane Regan

Product(s): Hevacomp Mechanical Designer Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Method If District Heating hasn't been selected then this report field should be considered…

over 3 years ago
Hevacomp
Hevacomp Wiki

Defining Door Types

Shane Regan

Product(s): Hevacomp Mechanical Designer Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview The name assigned to doors in the Fabric menu can have an effect on their categorisation…

over 3 years ago
Hevacomp
Hevacomp Wiki

BRUKL Compliance Report Project Name

Shane Regan

Product(s): Hevacomp Mechanical Designer Version(s): All Environment: N/A Area: Part L Subarea: BRUKL Overview A project name will be displayed at the top of all BRUKL Compliance documents…

over 3 years ago
Hevacomp
Hevacomp Wiki

Actual Emission Rate (BER) displayed as zero

Shane Regan

Product(s): Hevacomp Mechanical Designer Version(s): V8i Environment: N/A Area: Design Database Subarea: Part L Overview The Part L Results tab shows 0.0 kg CO 2 /m 2 /annum for the Actual…

over 3 years ago
Hevacomp
Hevacomp Wiki

Hevacomp Part L Energy Assessor courses: Now open for registration

Shane Regan

Hevacomp Energy Assessor (Non-dwelling) Level 3 & 4 (SBEM) Allows Hevacomp users - via an accredited Energy Assessor scheme provider - to work towards Energy Assessor status to show competency in production of EPC's using an approved SBEM interface…

over 7 years ago
Hevacomp
Hevacomp Blog

An important note on the PartL calculation

Shane Regan

Product(s): Hevacomp Mechanical Designer Version(s): V8i Environment: N/A Area: Design Database Subarea: Part L Overview The Bentley Hevacomp PartL program does not perform the PartL/SBEM calculation…

over 3 years ago
Hevacomp
Hevacomp Wiki