• Room is too complex to construct

    I am having difficulties auto defining rooms the design database. After following the tutorial video, I have set up the layers on the dxf as walls, partitions, doors and glazing as instructed. The layers are highlighted as you would expect them to be…

  • DXF Import issues - Drawing is inverted

    Product(s): Mechanical Designers - Design Database Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Problem Importing a DXF is showing the drawing inverted in either the X or Y…

  • DXF Import - Changing a DXF drawing

    Product(s): Hevacomp Mechanical Design Version(s): V8i (version number) Environment: N/A Area: N/A Subarea: N/A Overview If a project design is modified, you may wish to change the DXF for…

  • DXF Import - Re-aligning Rooms and DXF outline

    Product(s): Hevacomp Mechanical Design Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview When viewing the Design Database 3D Cad model, the floors in the project appear…

  • Floor Locations

    Good Afternoon All, Using Hevacomp design database (and CAD input) I have built a large 4 storey 'complex' building from the 1700's containing around 200 rooms, to get some idea of heat losses throughout the building. However, now the model has been…

  • RE: Hevacomp CAD Input - Certain lines from .dxf import file are not displaying

    Hi Brendan That sounds like the other vectors from your original CAD drawing are stored in an Xref - please see this document for an explanation and methods to resolve this. Regards,

  • DXF Import issues - Lines are missing from drawing

    Product(s): Hevacomp Mechanical Design Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Method When importing a DXF into the Design Database CAD Input module, vectors from the…

  • DXF Import Issues - Drawing is too large error

    Product(s): Hevacomp Mechanical Design Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview This document details what to do should you encounter the following "Drawing is…

  • DXF Import issues - 3D floors misaligned

    Product(s): Hevacomp Mechanical Design Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview DXF files should all be created with the same scale, origin and overall extents…

  • CAD Model Design - How to specify an Angle to South

    Product(s): Hevacomp Mechanical Designer Version(s): V8i (N/A) Environment: N/A Area: N/A Subarea: N/A Overview When importing a DXF file into CAD Input in Design Database, you must specify…
Communities
Support and Services
Training and Learning
Social Media