CAD Model Design - Changing Floor Heights

Duncan Brown — Mon, 06 Mar 2017 12:56:54 GMT

Current Revision posted to Hevacomp Wiki by Duncan Brown on 3/6/2017 12:56:54 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

This document provides guidance on how to change Floor heights in Design Database.

Introduction

It is sometimes necessary to alter floor heights after a CAD model has been drawn – for example if the original floor height is found to be incorrect, or if design revisions are made.

Method

While this function is not directly available in Hevacomp, a simple workaround using the Copy Floor function can be used to achieve the same result.

For example, if a floor has been traced at a floor height of 5m but subsequently needs to be changed to a floor height of 6m:

Step 1: Using the Floors>Copy floor command, copy the floor in question to an arbitrary height – making sure that the new floor does not overlap any of the existing model. Note that this will be a temporary floor. Using 20m in this instance:

It is advisable to inspect the 3D view at this stage; it should look something like the following:

Step 2: Using the Floors>Delete Floor function, delete the original floor (i.e. the floor with incorrect floor height of 5m in this case).

Step 3: Using the Floors>Copy floor command, copy the temporary floor created previously to the correct floor height of 6m:

Step 4: Finally, Delete the temporary floor. The remaining floor should then have the correct floor height of 6m.

Tags: DDB, design database, Bentley Hevacomp, Floor heights, Building Performance

CAD Model Design - Changing Floor Heights

Duncan Brown — Mon, 17 Oct 2016 14:06:14 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 10/17/2016 2:06:14 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

This document provides guidance on how to change Floor heights in Design Database.

Introduction

It is sometimes necessary to alter floor heights after a CAD model has been drawn – for example if the original floor height is found to be incorrect, or if design revisions are made.

Method

While this function is not directly available in Hevacomp, a simple workaround using the Copy Floor function can be used to achieve the same result.

For example, if a floor has been traced at a floor height of 5m but subsequently needs to be changed to a floor height of 6m:

Step 1: Using the Floors>Copy floor command, copy the floor in question to an arbitrary height – making sure that the new floor does not overlap any of the existing model. Note that this will be a temporary floor. Using 20m in this instance:

It is advisable to inspect the 3D view at this stage; it should look something like the following:

Step 2: Using the Floors>Delete Floor function, delete the original floor (i.e. the floor with incorrect floor height of 5m in this case).

Step 3: Using the Floors>Copy floor command, copy the temporary floor created previously to the correct floor height of 6m:

Step 4: Finally, Delete the temporary floor. The remaining floor should then have the correct floor height of 6m.

Tags: DDB, design database, Bentley Hevacomp, Floor heights, Building Performance

Changing Floor Heights

Duncan Brown — Tue, 10 Mar 2015 11:25:32 GMT

Revision 3 posted to Hevacomp Wiki by Duncan Brown on 3/10/2015 11:25:32 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

This document provides guidance on how to change Floor heights in Design Database.

Introduction

It is sometimes necessary to alter floor heights after a CAD model has been drawn – for example if the original floor height is found to be incorrect, or if design revisions are made.

Method

While this function is not directly available in Hevacomp, a simple workaround using the Copy Floor function can be used to achieve the same result.

For example, if a floor has been traced at a floor height of 5m but subsequently needs to be changed to a floor height of 6m:

Step 1: Using the Floors>Copy floor command, copy the floor in question to an arbitrary height – making sure that the new floor does not overlap any of the existing model. Note that this will be a temporary floor. Using 20m in this instance:

It is advisable to inspect the 3D view at this stage; it should look something like the following:

Step 2: Using the Floors>Delete Floor function, delete the original floor (i.e. the floor with incorrect floor height of 5m in this case).

Step 3: Using the Floors>Copy floor command, copy the temporary floor created previously to the correct floor height of 6m:

Step 4: Finally, Delete the temporary floor. The remaining floor should then have the correct floor height of 6m.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: DDB, design database, Bentley Hevacomp, Floor heights, Building Performance

Changing Floor Heights

Duncan Brown — Thu, 27 Nov 2014 12:04:19 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 11/27/2014 12:04:19 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

This document provides guidance on how to change Floor heights in Design Database.

Introduction

It is sometimes necessary to alter floor heights after a CAD model has been drawn – for example if the original floor height is found to be incorrect, or if design revisions are made.

Method

While this function is not directly available in Hevacomp, a simple workaround using the Copy Floor function can be used to achieve the same result.

For example, if a floor has been traced at a floor height of 5m but subsequently needs to be changed to a floor height of 6m:

Step 1: Using the Floors>Copy floor command, copy the floor in question to an arbitrary height – making sure that the new floor does not overlap any of the existing model. Note that this will be a temporary floor. Using 20m in this instance:

It is advisable to inspect the 3D view at this stage; it should look something like the following:

Step 2: Using the Floors>Delete Floor function, delete the original floor (i.e. the floor with incorrect floor height of 5m in this case).

Step 3: Using the Floors>Copy floor command, copy the temporary floor created previously to the correct floor height of 6m:

Step 4: Finally, Delete the temporary floor. The remaining floor should then have the correct floor height of 6m.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: DDB, design database, Bentley Hevacomp, Floor heights, Building Performance

Changing Floor Heights

Shane Regan — Wed, 05 Feb 2014 12:25:17 GMT

Revision 1 posted to Hevacomp Wiki by Shane Regan on 2/5/2014 12:25:17 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

This document provides guidance on how to change Floor heights in Design Database.

Introduction

It is sometimes necessary to alter floor heights after a CAD model has been drawn – for example if the original floor height is found to be incorrect, or if design revisions are made.

Method

While this function is not directly available in Hevacomp, a simple workaround using the Copy Floor function can be used to achieve the same result.

For example, if a floor has been traced at a floor height of 5m but subsequently needs to be changed to a floor height of 6m:

Step 1: Using the Floors>Copy floor command, copy the floor in question to an arbitrary height – making sure that the new floor does not overlap any of the existing model. Note that this will be a temporary floor. Using 20m in this instance:

It is advisable to inspect the 3D view at this stage; it should look something like the following:

Step 2: Using the Floors>Delete Floor function, delete the original floor (i.e. the floor with incorrect floor height of 5m in this case).

Step 3: Using the Floors>Copy floor command, copy the temporary floor created previously to the correct floor height of 6m:

Step 4: Finally, Delete the temporary floor. The remaining floor should then have the correct floor height of 6m.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: DDB, design database, Bentley Hevacomp, Floor heights, Building Performance

CAD Model Design - Changing Floor Heights

CAD Model Design - Changing Floor Heights

Overview

Introduction

Method

CAD Model Design - Changing Floor Heights

Overview

Introduction

Method

Changing Floor Heights

Overview

Introduction

Method

See Also

External Links

Comments or Corrections?

Changing Floor Heights

Overview

Introduction

Method

See Also

External Links

Comments or Corrections?

Changing Floor Heights

Overview

Introduction

Method

See Also

External Links

Comments or Corrections?