Required Windows Permissions (v25)

Duncan Brown — Thu, 30 Nov 2017 16:43:35 GMT

Current Revision posted to Hevacomp Wiki by Duncan Brown on 11/30/2017 4:43:35 PM

	Product(s):	All Hevacomp Products
	Version(s):	V8i (25)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

This document refers to Version 25 Bentley Hevacomp V8i only

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

A lack of permissions can also lead to a "Cannot create Meteonorm Weather file" and a consequent "Error 9 - subscript out of range" error when trying to create weather locations or access weather data.

To remedy these potential issues, the user must be allowed FULL permissions to a number of locations.

Method

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

Tags: installation, Permissions, Hevacomp, Mechanical and Electrical Designer, V25

Required Windows Permissions

Duncan Brown — Mon, 23 Jan 2017 15:40:28 GMT

Revision 11 posted to Hevacomp Wiki by Duncan Brown on 1/23/2017 3:40:28 PM

	Product(s):	All Hevacomp Products
	Version(s):	V8i (25)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

This document refers to Version 25 Bentley Hevacomp V8i only

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\
For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\
For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path
In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

With regards the Hevacomp Projects folder, this may or may not contain project folder, but it does contain control files for the software. Care should be taken to examine the PATHS.DAT file that the folder contains. If the content of this file (open with notepad) does not point to its own location, then examine the location stored in the file and provide permissions to that location too.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

Once permissions have been set correctly, if you were experiencing Meteonorm and Error 9 message, the final step is to repair the project so the weather data is generated correctly:

Load Design Database and open your project.
Go into the Building Data program.
Select a weather location that is different to the on you require and click on the green tick button to set this in place.
Now go back into the Building Data program.
This time, select the correct weather location and click on the green tick button to set this in place.
The weather data should now be correctly defined.

Tags: installation, Permissions, Hevacomp, Mechanical and Electrical Designer, V25

Required Windows Permissions

Duncan Brown — Tue, 15 Nov 2016 12:15:06 GMT

Revision 10 posted to Hevacomp Wiki by Duncan Brown on 11/15/2016 12:15:06 PM

	Product(s):	All Hevacomp Products
	Version(s):	V8i (25)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

This document refers to Version 25 Bentley Hevacomp V8i only

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\
For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\
For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path
In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

Once permissions have been set correctly, if you were experiencing Meteonorm and Error 9 message, the final step is to repair the project so the weather data is generated correctly:

Load Design Database and open your project.
Go into the Building Data program.
Select a weather location that is different to the on you require and click on the green tick button to set this in place.
Now go back into the Building Data program.
This time, select the correct weather location and click on the green tick button to set this in place.
The weather data should now be correctly defined.

Tags: installation, Permissions, Hevacomp, Mechanical and Electrical Designer, V25

Required Windows Permissions

Duncan Brown — Mon, 31 Oct 2016 14:25:47 GMT

Revision 9 posted to Hevacomp Wiki by Duncan Brown on 10/31/2016 2:25:47 PM

	Product(s):	All Hevacomp Products
	Version(s):	V8i (25)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

Once permissions have been set correctly, if you were experiencing Meteonorm and Error 9 message, the final step is to repair the project so the weather data is generated correctly:

Load Design Database and open your project.
Go into the Building Data program.
Select a weather location that is different to the on you require and click on the green tick button to set this in place.
Now go back into the Building Data program.
This time, select the correct weather location and click on the green tick button to set this in place.
The weather data should now be correctly defined.

Tags: meteonorm, installation, 76, 52, weather data, install, Hevacomp, V8i V25, 75, Error 9

Version 25 - Required Windows Permissions

Duncan Brown — Thu, 28 Jul 2016 09:17:06 GMT

Revision 8 posted to Hevacomp Wiki by Duncan Brown on 7/28/2016 9:17:06 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

Once permissions have been set correctly, if you were experiencing Meteonorm and Error 9 message, the final step is to repair the project so the weather data is generated correctly:

Load Design Database and open your project.
Go into the Building Data program.
Select a weather location that is different to the on you require and click on the green tick button to set this in place.
Now go back into the Building Data program.
This time, select the correct weather location and click on the green tick button to set this in place.
The weather data should now be correctly defined.

External links

Bentley homepage

Bentley LEARN Server

Tags: meteonorm, installation, 76, 52, weather data, install, Hevacomp, V8i V25, 75, Error 9

Version 25 - Required Windows Permissions

Duncan Brown — Mon, 14 Mar 2016 14:31:43 GMT

Revision 7 posted to Hevacomp Wiki by Duncan Brown on 3/14/2016 2:31:43 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

Once permissions have been set correctly, if you were experiencing Meteonorm and Error 9 message, the final step is to repair the project so the weather data is generated correctly:

Load Design Database and open your project.
Go into the Building Data program.
Select a weather location that is different to the on you require and click on the green tick button to set this in place.
Now go back into the Building Data program.
This time, select the correct weather location and click on the green tick button to set this in place.
The weather data should now be correctly defined.

External links

Bentley homepage

Bentley LEARN Server

Tags: meteonorm, installation, 76, 52, weather data, install, Hevacomp, V8i V25, 75, Error 9

Version 25 - Required Windows Permissions

Duncan Brown — Thu, 03 Sep 2015 10:54:58 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 9/3/2015 10:54:58 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

Once permissions have been set correctly, the final step is to repair the project so the weather data is generated correctly.

Load Design Database and open your project.
Go into the Building Data program.
Select a weather location that is different to the on you require and click on the green tick button to set this in place.
Now go back into the Building Data program.
This time, select the correct weather location and click on the green tick button to set this in place.
The weather data should now be correctly defined.

External links

Bentley homepage

Bentley LEARN Server

Tags: meteonorm, weather data, design database, Error 9, V25

Version 25 - Required Windows Permissions

Duncan Brown — Tue, 10 Mar 2015 12:35:13 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 3/10/2015 12:35:13 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Version 25 - Required Windows Permissions

Duncan Brown — Thu, 11 Dec 2014 09:46:27 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 12/11/2014 9:46:27 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected
folder incorporating all sub folders and files.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Version 25 - Required Windows Permissions

Duncan Brown — Thu, 11 Dec 2014 09:44:41 GMT

Revision 3 posted to Hevacomp Wiki by Duncan Brown on 12/11/2014 9:44:41 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

This document refers to Version 25 Bentley Hevacomp V8i only

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected folder, incorporating all sub folders and files.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Required Windows Permissions

Duncan Brown — Wed, 18 Jun 2014 11:02:23 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 6/18/2014 11:02:23 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected folder, incorporating all sub folders and files.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Required Windows Permissions

Duncan Brown — Fri, 28 Feb 2014 15:19:19 GMT

Revision 1 posted to Hevacomp Wiki by Duncan Brown on 2/28/2014 3:19:19 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

There are a number of permissions that the user account requires to be able to run the Hevacomp software correctly. Without these permissions, the user may experience these errors:

Error 52 - Bad file name or number
Error 75 - Path/File access error
Error 76 - Path not found

Method

First of all, ascertain whether you have a client only or server client installation, and also where the software is installed:

For 32bit Windows, the client only installation is placed in C:\Program Files\

For 64bit Windows, the client only installation is placed in C:\Program Files (x86)\

For Server/Client installations, examine the shortcut and remove the HEVA25 part of the path

In the information below we shall refer to this location as the <installation folder>

For Client only installations

The user will need full permissions to the following:

<installation folder>\Heva25\

C:\Hevacomp Projects\

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

For Server/Client installations

The user will need full permissions to the following:

<installation folder>\heva25\ *

C:\Hevacomp Projects\ ^

* this may be on a mapped drive or UNC path
^ this may not exist on a Server/client installation

During the setup of the software you will be asked to specify a location where projects are to be stored - this is frequently a mapped share - the user will also need full permissions into here.

There may also be a Hevacomp Projects in the <installation folder>\Heva25\ folder or on the root of your <installation folder> drive. The user will need full permissions to this location too.

Ensure that full permissions are cascaded through any selected folder, incorporating all sub folders and files.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Required Windows Permissions (v25)

Required Windows Permissions (v25)

Overview

Method

Required Windows Permissions

Overview

Method

For Client only installations

For Server/Client installations

Required Windows Permissions

Overview

Method

For Client only installations

For Server/Client installations

Required Windows Permissions

Overview

Method

Version 25 - Required Windows Permissions

Overview

Method

External links

Version 25 - Required Windows Permissions

Overview

Method

External links

Version 25 - Required Windows Permissions

Overview

Method

External links

Version 25 - Required Windows Permissions

Overview

Method

See Also

External Links

Comments or Corrections?

Version 25 - Required Windows Permissions

Overview

Method

See Also

External Links

Comments or Corrections?

Version 25 - Required Windows Permissions

Overview

Method

See Also

External Links

Comments or Corrections?

Required Windows Permissions

Overview

Method

For Client only installations

For Server/Client installations

See Also

External Links

Comments or Corrections?

Required Windows Permissions

Overview

Method

For Client only installations

For Server/Client installations

See Also

External Links

Comments or Corrections?