Partition Centre Lines

Shane Regan — Mon, 24 Aug 2020 09:13:44 GMT

Current Revision posted to Hevacomp Wiki by Shane Regan on 8/24/2020 9:13:44 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

The Part L calculation in Hevacomp V26 now includes an option to allow for additional flexibility when tracing rooms.

Typically Design Database rooms are entered using the internal edge of room surfaces. The NCM Modelling Guide requires the floor area to be calculated to the centreline of internal partitions.

Method

The Centre line option (under the General > Other tab) caters for tracing rooms using either:

- Partition Centre lines

- Internal partition edges

Care should be taken in selecting the correct method as this will have implications on room areas.

If partitions have been drawn using Centre lines, selecting this option will prevent adjustment to floor areas
If partitions have been drawn to the inside edge of partitions, then this option should remain unticked so that floor areas are adjusted to allow for the half-width of the partition.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Partition, center lines

Partition Centre Lines

Duncan Brown — Thu, 16 Mar 2017 12:59:38 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 3/16/2017 12:59:38 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

The Part L calculation in Hevacomp V26 now includes an option to allow for additional flexibility when tracing rooms.

Typically Design Database rooms are entered using the internal edge of room surfaces. The NCM Modelling Guide requires the floor area to be calculated to the centreline of internal partitions.

Method

The Centre line option (under the General > Other tab) caters for tracing rooms using either:

- Partition Centre lines

- Internal partition edges

Care should be taken in selecting the correct method as this will have implications on room areas.

If partitions have been drawn using Centre lines, selecting this option will prevent adjustment to floor areas
If partitions have been drawn to the inside edge of partitions, then this option should remain unticked so that floor areas are adjusted to allow for the half-width of the partition.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Partition, center lines

Partition Centre Lines

Duncan Brown — Thu, 03 Nov 2016 15:16:14 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 11/3/2016 3:16:14 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

The Part L calculation in Hevacomp V26 now includes an option to allow for additional flexibility when tracing rooms.

Typically Design Database rooms are entered using the internal edge of room surfaces. The NCM Modelling Guide requires the floor area to be calculated to the centreline of internal partitions.

Method

The Centre line option (under the General > Other tab) caters for tracing rooms using either:

- Partition Centre lines

- Internal partition edges

Care should be taken in selecting the correct method as this will have implications on room areas.

If partitions have been drawn using Centre lines, selecting this option will prevent adjustment to floor areas
If partitions have been drawn to the inside edge of partitions, then this option should remain unticked so that floor areas are adjusted to allow for the half-width of the partition.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Partition, center lines

Partition Centre Lines

Stephen Brown — Tue, 17 Mar 2015 11:40:47 GMT

Revision 3 posted to Hevacomp Wiki by Stephen Brown on 3/17/2015 11:40:47 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

The Part L calculation in Hevacomp V26 now includes an option to allow for additional flexibility when tracing rooms.

Typically Design Database rooms are entered using the internal edge of room surfaces. The NCM Modelling Guide requires the floor area to be calculated to the centreline of internal partitions.

Method

The Centre line option (under the General > Other tab) caters for tracing rooms using either:

- Partition Centre lines:

Or;

- Internal partition edges:

Care should be taken in selecting the correct method as this will have implications on room areas.

If partitions have been drawn using Centre lines, selecting this option will prevent adjustment to floor areas
If partitions have been drawn to the inside edge of partitions, then this option should remain unticked so that floor areas are adjusted to allow for the half-width of the partition.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Partition Centre Lines

Shane Regan — Tue, 06 Jan 2015 13:11:28 GMT

Revision 2 posted to Hevacomp Wiki by Shane Regan on 1/6/2015 1:11:28 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

The Part L calculation in Hevacomp V26 now includes an option to allow for additional flexibility when tracing rooms.

Typically Design Database rooms are entered using the internal edge of room surfaces. The NCM Modelling Guide requires the floor area to be calculated to the centreline of internal partitions.

Method

The Centre line option (under the General > Other tab) caters for tracing rooms using either:

- Partition Centre lines:

Or;

- Internal partition edges:

Care should be taken in selecting the correct method as this will have implications on room areas.

If partitions have been drawn using Centre lines, selecting this option will prevent adjustment to floor areas
If partitions have been drawn to the inside edge of partitions, then this option should remain unticked so that floor areas are adjusted to allow for the half-width of the partition.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Partition Centre line Option

Shane Regan — Tue, 21 Oct 2014 16:10:39 GMT

Revision 1 posted to Hevacomp Wiki by Shane Regan on 10/21/2014 4:10:39 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

The Part L calculation in Hevacomp V26 now includes an option to allow for additional flexibility when tracing rooms.

Typically Design Database rooms are entered using the internal edge of room surfaces. The NCM Modelling Guide requires the floor area to be calculated to the centreline of internal partitions.

Method

The Centre line option (under the General > Other tab) caters for tracing rooms using either:

- Partition Centre lines:

Or;

- Internal partition edges:

Care should be taken in selecting the correct method as this will have implications on room areas.

If partitions have been drawn using Centre lines, selecting this option will prevent adjustment to floor areas
If partitions have been drawn to the inside edge of partitions, then this option should remain unticked so that floor areas are adjusted to allow for the half-width of the partition.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Partition Centre Lines

Partition Centre Lines

Overview

Method

Partition Centre Lines

Overview

Method

Partition Centre Lines

Overview

Method

Partition Centre Lines

Overview

Method

See Also

External Links

Comments or Corrections?

Partition Centre Lines

Overview

Method

See Also

External Links

Comments or Corrections?

Partition Centre line Option

Overview

Method

See Also

External Links

Comments or Corrections?