Shell and Core Building Services can cause an error

Shane Regan — Mon, 24 Aug 2020 09:13:48 GMT

Current Revision posted to Hevacomp Wiki by Shane Regan on 8/24/2020 9:13:48 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

For Shell and Core developments an SBEM error will occur if Stage of Analysis is set to As built, and then the Room is a shell area and building services systems have been assumed option is selected:

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

At the As Built stage of development building services are expect to be fully defined. You will need to deselect Room is a shell area and building services systems have been assumed option to allow the calculation to proceed..

Tags: shell and core, SBEM, Hevacomp Mechanical Designer, PartL

Shell and Core Building Services can cause an error

Duncan Brown — Thu, 16 Mar 2017 12:23:12 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 3/16/2017 12:23:12 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

Tags: shell and core, SBEM, Hevacomp Mechanical Designer, PartL

Shell and Core Building Services can cause an error

Duncan Brown — Thu, 16 Mar 2017 12:19:44 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 3/16/2017 12:19:44 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

To complete your calculation you will need to deselect the Room is a shell area and building services systems have been assumed option. This is because at the As Built stage of development the building services should be fully defined.

Shell and Core Building Services

Shane Regan — Thu, 23 Jul 2015 13:26:38 GMT

Revision 4 posted to Hevacomp Wiki by Shane Regan on 7/23/2015 1:26:38 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

For Shell and Core developments an SBEM error will occur if, firstly, the Stage of Analysis is set to As built, and then the Room is a shell area and building services systems have been assumed option is selected:

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Shell and Core Building Services

Stephen Brown — Tue, 17 Mar 2015 11:42:49 GMT

Revision 3 posted to Hevacomp Wiki by Stephen Brown on 3/17/2015 11:42:49 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

For Shell and Core developments an SBEM will occur if, firstly, the Stage of Analysis is set to As built, and then the Room is a shell area and building services systems have been assumed option is selected:

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Shell and Core Building Services

Duncan Brown — Fri, 12 Dec 2014 15:37:55 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 12/12/2014 3:37:55 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Shell and Core Building Services

Shane Regan — Fri, 05 Dec 2014 15:37:14 GMT

Revision 1 posted to Hevacomp Wiki by Shane Regan on 12/5/2014 3:37:14 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

Method

In Hevacomp V25, the above settings will result in a generic SBEM error message when calculating results:

In Hevacomp V26, a new error message has been added to assist in diagnosing this issue:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, DDB, Hevacomp

Shell and Core Building Services can cause an error

Shell and Core Building Services can cause an error

Overview

Method

Shell and Core Building Services can cause an error

Overview

Method

Shell and Core Building Services can cause an error

Overview

Method

See Also

Shell and Core Building Services

Overview

Method

See Also

External Links

Comments or Corrections?

Shell and Core Building Services

Overview

Method

See Also

External Links

Comments or Corrections?

Shell and Core Building Services

Overview

Method

See Also

External Links

Comments or Corrections?

Shell and Core Building Services

Overview

Method

See Also

External Links

Comments or Corrections?