You are currently reviewing an older revision of this page.
This document provides guidance on the Additional fresh air option in Hevacomp Simulator.
Many of the Simulations within Hevacomp Simulator contain an option to incorporate Additional fresh air into your design. The Frequency simulation, for example, features the following:
This will only affect results if you have chosen the Simple air change rate option, within the Simulator > Design Data > Model menu:
The Multi-zone air flow model on the other hand, will not be affected by this Additional fresh air. This is because the purpose of the Multi-zone air flow model is to analyse detailed flowpaths such as openable windows, rather than the affect of simple air change figures.
Product TechNotes and FAQs
Building Product TechNotes And FAQs
Bentley homepage
HevacompMechanical Designer
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!