Netsys annotation - adding pipe or duct notes

Duncan Brown — Tue, 16 Jan 2018 13:46:36 GMT

Current Revision posted to Hevacomp Wiki by Duncan Brown on 1/16/2018 1:46:36 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Notes

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be achieved by selecting Notes>Pipe sizes>Add some, or Notes>Pipe properties>Add some, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

Tags: Notes, Pipes, Gas, Hevacomp, Duct, Properties

Pipe Notes - adding pipe notes

Duncan Brown — Tue, 16 Jan 2018 13:45:07 GMT

Revision 7 posted to Hevacomp Wiki by Duncan Brown on 1/16/2018 1:45:07 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Notes

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be achieved by selecting Notes>Pipe sizes>Add some, or Notes>Pipe properties>Add some, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

Tags: Notes, Pipes, Gas, Hevacomp, Duct, Properties

Pipe Notes - adding pipe notes

Duncan Brown — Tue, 16 Jan 2018 12:36:25 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 1/16/2018 12:36:25 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Notes

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be achieved by selecting Notes>Pipe sizes>Add some, or Notes>Pipe properties>Add some, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

Tags: Notes, Pipes, Gas, Hevacomp, Duct, Properties

Pipe Notes - adding pipe notes

Duncan Brown — Tue, 16 Jan 2018 12:11:38 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 1/16/2018 12:11:38 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Notes

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be achieved by selecting Notes>Pipe sizes>Add some, or Notes>Pipe properties>Add some, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

Tags: Notes, Pipes, Gas, Hevacomp, Duct, Properties

Pipe Notes

Shane Regan — Fri, 21 Oct 2016 14:49:20 GMT

Revision 4 posted to Hevacomp Wiki by Shane Regan on 10/21/2016 2:49:20 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Notes

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be achieved by selecting Notes>Pipe sizes>Add some, or Notes>Pipe properties>Add some, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

Tags: Notes, Pipes, Gas, Hevacomp, Duct, Properties

Pipe Notes

Duncan Brown — Tue, 10 Mar 2015 12:49:59 GMT

Revision 3 posted to Hevacomp Wiki by Duncan Brown on 3/10/2015 12:49:59 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	v8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Pipe Sizing
	Original Author:	Bentley Technical Support Group

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be done by using the Notes>Pipe sizes>Add some option, or the Notes>Pipe properties>Add some option, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Pipes, Gas, Hevacomp, Duct

Pipe Notes

Duncan Brown — Tue, 10 Mar 2015 12:48:27 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 3/10/2015 12:48:27 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	v8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Pipe Sizing
	Original Author:	Bentley Technical Support Group

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be done by using the Notes>Pipe sizes>Add some option, or the Notes>Pipe properties>Add some option, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Pipes, Gas, Hevacomp, Duct

Pipe Notes

Shane Regan — Fri, 20 Feb 2015 10:22:11 GMT

Revision 1 posted to Hevacomp Wiki by Shane Regan on 2/20/2015 10:22:11 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	v8i
	Environment:	N/A
	Area:	Netsys
	Subarea:	Pipe Sizing
	Original Author:	Bentley Technical Support Group

Overview

It is possible to add notes to any pipe/duct section in a Netsys project.

This can be done by using the Notes>Pipe sizes>Add some option, or the Notes>Pipe properties>Add some option, and then clicking on the desired location.

Method

The above methods will only work if the correct pipe height has been set.

For example, using Pipes>Pipe info shows that the below pipe is at a height of 0.35m:

Then, this same height needs to be set in the Pipes>Defaults menu:

The properties will then be displayed after clicking on the Notes>Pipe properties>Add some option, and then selecting the pipe:

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Pipes, Gas, Hevacomp, Duct

Netsys annotation - adding pipe or duct notes

Netsys annotation - adding pipe or duct notes

Overview

Method

Pipe Notes - adding pipe notes

Overview

Method

Pipe Notes - adding pipe notes

Overview

Method

Pipe Notes - adding pipe notes

Overview

Method

Pipe Notes

Overview

Method

Pipe Notes

Overview

Method

See Also

External Links

Comments or Corrections?

Pipe Notes

Overview

See Also

External Links

Comments or Corrections?

Pipe Notes

See Also

External Links

Comments or Corrections?