You are currently reviewing an older revision of this page.
Document Type: FAQ Product(s): Hevacomp Mechanical Designer Version(s): All Original Author: Bentley Technical Support Group
Document Type: FAQ
Product(s): Hevacomp Mechanical Designer
Version(s): All
Original Author: Bentley Technical Support Group
When creating Design Database projects, it can become inconvenient to generate a personalised construction database for each new project. If the user has standard set of fabric constructions that will be used through many projects, it may be prudent to set up a template project for Design Database.
To set up a template project you should start a new Design Database project in a specific folder, for example, C:\Hevacomp Projects\DDB Template\ and then enter all of your fabric constructions, special window types or fin data into this project. Do not do anything else to this project, do not add a floor, or any room data, etc, just leave it as it is with only the Fabric data modified. Exit DDB. Your template project is now set up.
When you wish to start a new project, using Windows Explorer or My Computer, navigate to your project folders, and create a new folder using your naming convention, for example: C:\Hevacomp Projects\14-12-06 Sheffield Office\ and then copy all of the files from your Template folder into this folder.
Now start DDB and navigate to your new project folder, you will be able to open this blank project and your standard fabric constructions will be extant.
If you have an existing project with your special constructions in place, and have already started your new project without using the above method, you may wish to copy the fabric data from the original project into your new project. This method also works for copying existing fabric data into a template project.
To copy fabric data into an existing project, you must copy a number of files. These files are detailed below
Product TechNotes and FAQs
Building Product TechNotes And FAQs
How do I convert my Version 18 Connect projects to Version 24
How to move custom reports to a new version
How to reinstall Crystal Reports
Glazing Data - How Do I Calculate Solar Gain Factors
Creating a template project
CAD Model Design - Elevating roofs using Roof Points
CAD Model Design - How to specify an Angle to South
Defining lighting control and daylight factors for Design Simulation calculations
Calculations - Using Fresh air loads in Design Database
DXF Import issues - 3D floors misaligned
Why does Design Database tell me my project is a CAD project
Hardware Specification - What do I need to run Bentley Hevacomp?
How do I automatically roll out over a network
Why does my installation generate a 1608 or 1628 error
How do I modify my firewall settings in XP to allow the software to run
How do I set up my licence server on a Novell network
What port does the Licence Manager use
Why does the Licence Manager fail to restart on a server reboot
Heating and Chilled water - Higher than expected flow rates
How do I add floor change connectors in Netsys
Converting Flow Rates from Loading Units To Litres Per Second
How do I fix or unfix a vertical pipeduct section
Why does NETSYS tell me my project is a CAD project
Adding wall mounted luminaires
Why Do Lumen Reports Show NA
How do I create a Summer Design Day based on the CIBSE Summer Design Year data
What is dynamic simulation
Bentley homepage
HevacompMechanical Designer
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!