How to fix a vertical pipe or duct

Duncan Brown — Tue, 04 Oct 2016 15:22:05 GMT

Current Revision posted to Hevacomp Wiki by Duncan Brown on 10/4/2016 3:22:05 PM

	Product(s):	Bentley Hevacomp
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

You may wish to fix the size of a riser pipe or duct section.

Method

Consider this simple CWS project with a riser between floors:

In this example, the riser has sized to 22m, but we wish to fix it at 15mm. To enable us to select the riser correctly, we need to set the pipe height to the mid point between the start and end of the pipe. The lowest point is .45m, and the highest 3, the midpoint is 1.7m.

From the Pipes menu, select the Defaults option. Now choose the "Special Height" from the dialog and set it to our mid point height (1.7m). Close the dialog and select the Fix/unfix pipes option from the Pipes menu.

While in Fix/unfix mode, RIGHT click as near to the center of the riser section as possible. It will help if you zoom into this area before trying to select the riser point.

If you select the area correctly, you will see a coloured dot highlighted in the center of the riser/floor change connector marker as in the zoomed image below. Once the section is correctly selected you can set the parameters of the section, as required.

Tags: Riser, Hevacomp Mechanical Designer, Pipe, Vertical, Fix, Duct, netsys

Fixing a vertical pipe or duct section

Duncan Brown — Tue, 10 Mar 2015 10:38:43 GMT

Revision 15 posted to Hevacomp Wiki by Duncan Brown on 3/10/2015 10:38:43 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

On the face of it, it may appear difficult to fix the size of riser pipe (or duct) in the Netsys program, however following these guidelines should help.

Consider the example below. Here we have a simple CWS project with a riser to floor change connector:

In this example, the riser has sized to 22m, but we wish to fix it at 15mm. To enable us to select the riser correctly, we need to set the pipe height to somewhere between the lower and upper position of the pipe. In this instance the lowest point of the pipe is .45m and the highest point is 3m. Our mid point is 1.7m.

While in Fix/unfix mode, RIGHT click as near to the center of the riser section as possible. It will help if you zoom into this area before trying to select the riser point.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, Riser, Pipe, TechNote, Duct, netsys

Fixing a vertical pipe or duct section

Duncan Brown — Tue, 02 Dec 2014 14:40:13 GMT

Revision 14 posted to Hevacomp Wiki by Duncan Brown on 12/2/2014 2:40:13 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

On the face of it, it may appear difficult to fix the size of riser pipe (or duct) in the Netsys program, however following these guidelines should help.

Consider the example below. Here we have a simple CWS project with a riser to floor change connector:

While in Fix/unfix mode, RIGHT click as near to the center of the riser section as possible. It will help if you zoom into this area before trying to select the riser point.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, Riser, Pipe, TechNote, Duct, netsys

Fixing a vertical pipe or duct section

Duncan Brown — Mon, 07 Jul 2014 15:35:43 GMT

Revision 13 posted to Hevacomp Wiki by Duncan Brown on 7/7/2014 3:35:43 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

On the face of it, it may appear difficult to fix the size of riser pipe (or duct) in the Netsys program, however following these guidelines should help.

Consider the example below. Here we have a simple CWS project with a riser to floor change connector:

While in Fix/unfix mode, RIGHT click as near to the center of the riser section as possible. It will help if you zoom into this area before trying to select the riser point.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, Riser, Pipe, TechNote, Duct, netsys

Fixing a vertical pipe or duct section

Elisabeth Pry — Tue, 25 Jun 2013 13:57:03 GMT

Revision 12 posted to Hevacomp Wiki by Elisabeth Pry on 6/25/2013 1:57:03 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

To see how to fix a riser pipe, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, Riser, Pipe, TechNote, Duct, netsys

Fixing a vertical pipe or duct section

Duncan Brown — Tue, 17 Jul 2012 09:06:34 GMT

Revision 11 posted to Hevacomp Wiki by Duncan Brown on 7/17/2012 9:06:34 AM

Document Information

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

To see how to fix a riser pipe, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: TechNote Netsys Riser Duct Pipe

Netsys - Fixing a vertical pipe or duct section [TN]

Duncan Brown — Mon, 16 Jul 2012 11:16:54 GMT

Revision 10 posted to Hevacomp Wiki by Duncan Brown on 7/16/2012 11:16:54 AM

Document Information

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

To see how to fix a riser pipe, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: TechNote Netsys Riser Duct Pipe

Netsys - Fixing a vertical pipe or duct section [TN]

Duncan Brown — Fri, 03 Jun 2011 15:24:05 GMT

Revision 9 posted to Hevacomp Wiki by Duncan Brown on 6/3/2011 3:24:05 PM

Document Information

Overview

It may sometimes be necessary to fix the size of a rising pipe or duct section in the Netsys program.

Method

To see how to fix a riser pipe, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: TechNote Netsys Riser Duct Pipe

How Do I Fix Or Unfix A Vertical Pipe or duct Section [TN]

Elisa McGraw — Mon, 12 Jul 2010 15:15:15 GMT

Revision 8 posted to Hevacomp Wiki by Elisa McGraw on 7/12/2010 3:15:15 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

The riser has sized to 22mm but we wish to fix it to 15mm. We must set our pipe or duct height to somewhere in between these too values. Select ‘Special Height' from the Defaults dialog, and set the Pipe Height to a point in between the lowest and highest part of the section to fix. In this case the lowest point is .45m and the highest point is 3m. Set Pipe or Duct height to a mid point (1.7m) and return to the graphical input screen.

Select Fix/unfix Pipes from the menu. While in this mode, RIGHT CLICK as near to centre of the riser section as possible. It will help greatly if you zoom in before attempting to select the riser section.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: TechNote

How Do I Fix Or Unfix A Vertical Pipe or duct Section [TN]

Elisa McGraw — Thu, 24 Jun 2010 15:17:17 GMT

Revision 7 posted to Hevacomp Wiki by Elisa McGraw on 6/24/2010 3:17:17 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: TechNote

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Duncan Brown — Thu, 21 May 2009 11:25:04 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 5/21/2009 11:25:04 AM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Elisa McGraw — Thu, 05 Feb 2009 14:19:51 GMT

Revision 5 posted to Hevacomp Wiki by Elisa McGraw on 2/5/2009 2:19:51 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags:

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Duncan Brown — Fri, 23 Jan 2009 14:19:05 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 1/23/2009 2:19:05 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags:

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Elisa McGraw — Tue, 20 Jan 2009 16:49:44 GMT

Revision 3 posted to Hevacomp Wiki by Elisa McGraw on 1/20/2009 4:49:44 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags:

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Lauren Smith — Wed, 10 Dec 2008 20:04:49 GMT

Revision 2 posted to Hevacomp Wiki by Lauren Smith on 12/10/2008 8:04:49 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags:

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Lauren Smith — Wed, 10 Dec 2008 20:03:31 GMT

Revision 1 posted to Hevacomp Wiki by Lauren Smith on 12/10/2008 8:03:31 PM

Document Information

Overview

If a floor change connector, or a pipe/duct height chance is specified in a project, you may wish to fix the size of the ‘riser' section.

Method

Consider the example image below. Here we have a very simple CWS project with a riser to floor change connector.

If you select the correct area, you should see a coloured dot in the centre of the riser/floor change connector.

Once the section is selected, you can use the dialog to set parameters for the riser section.

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags:

How to fix a vertical pipe or duct

How to fix a vertical pipe or duct

Overview

Method

Fixing a vertical pipe or duct section

Overview

Method

See Also

External Links

Comments or Corrections?

Fixing a vertical pipe or duct section

Overview

Method

See Also

External Links

Comments or Corrections?

Fixing a vertical pipe or duct section

Overview

Method

See Also

External Links

Comments or Corrections?

Fixing a vertical pipe or duct section

Overview

Method

See Also

External Links

Comments or Corrections?

Fixing a vertical pipe or duct section

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

Netsys - Fixing a vertical pipe or duct section [TN]

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

Netsys - Fixing a vertical pipe or duct section [TN]

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

How Do I Fix Or Unfix A Vertical Pipe or duct Section [TN]

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

How Do I Fix Or Unfix A Vertical Pipe or duct Section [TN]

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

How Do I Fix Or Unfix A Vertical Pipe or duct Section

Document Information

Overview