How Do I Move My Connect Custom Reports To The New Version

Document Information

Document Type: FAQ

Product(s): Connect

Version(s): 21 - 24

Original Author: Bentley Technical Support Group

Overview

Hevacomps Connect package contains a powerful reporting tool that allows you to set up your own custom reports for your projects.

If you have created your own Custom Reports in Connect V23 and wish to use these same reports in V24 you need to follow the instructions below.

Method

To use your existing reports in the current version of the software, you will need to copy files from your old version to the current version.

This example shows how to copy version 23 custom reports to version 24. The procedure will also work for transferring version 21 to version 24, or version 22 to version 24. Look for your files in the Heva21 or Heva22 folder rather than the Heva23 folder.

Notes

ConnectRpt28_1.rpt is the first custom report. All files with a number greater than 28 should be copied, I.e.: ConnectRpt28_1.rpt to ConnectRpt35_1.rpt etc
If you are copying these files from an earlier version (e.g.V21 or V22), the first file is ConnectRpt27_1.rpt, and you will start from this file.
While we have tested, and confirm, moving files from version 21, version 22 and version 23 files to later versions, we have not tested, nor recommend, moving files back to earlier versions.

How do I convert my Version 18 Connect projects to Version 24

Connect Reports only show headers and footers

How to reinstall Crystal Reports

Glazing Data - How Do I Calculate Solar Gain Factors

Creating a template project

CAD Model Design - Elevating roofs using Roof Points

CAD Model Design - How to specify an Angle to South

Defining lighting control and daylight factors for Design Simulation calculations

Calculations - Using Fresh air loads in Design Database

DXF Import issues - 3D floors misaligned

Why does Design Database tell me my project is a CAD project

Hardware Specification - What do I need to run Bentley Hevacomp?

How do I automatically roll out over a network

Why does my installation generate a 1608 or 1628 error

How do I modify my firewall settings in XP to allow the software to run

How do I set up my licence server on a Novell network

What port does the Licence Manager use

Why does the Licence Manager fail to restart on a server reboot

Heating and Chilled water - Higher than expected flow rates

How do I add floor change connectors in Netsys

Converting Flow Rates from Loading Units To Litres Per Second

How do I fix or unfix a vertical pipeduct section

Why does NETSYS tell me my project is a CAD project

Adding wall mounted luminaires

Why Do Lumen Reports Show NA

How do I create a Summer Design Day based on the CIBSE Summer Design Year data

What is dynamic simulation

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!