BRUKL and ENE01 Compliance Checker differences

Shane Regan — Mon, 24 Aug 2020 09:13:44 GMT

Current Revision posted to Hevacomp Wiki by Shane Regan on 8/24/2020 9:13:44 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

It has been noted that there is a discrepancy between the Primary Energy figure on the BRUKL report and that generated by the BREEAM New Construction ENE01 Compliance Checker.

BRE have made this statement:

"Differences in the figures for the BRUKL and BREEAM documents are due to a difference in the scope for the energy value. Current versions of the approved building energy modelling software calculate energy consumption on the basis of delivered energy, not primary energy, so it will not be possible to use the figures reported in the BRUKL Output Document (technical data sheet) to accurately determine the number of BREEAM credits achieved. Until such time as the next version of the National Calculation Methodology is revised to include primary energy, BREEAM assessors and consultants will need to upload their BRUKL output files to the BREEAM Compliance Checker website to accurately calculate and verify the three EPRs for demand, consumption and CO2 and the number of BREEAM credits achieved.'

(See section CN7 of this document)

Tags: Hevacomp Mechanical Designer, Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM

BRUKL and ENE01 Compliance Checker differences

Duncan Brown — Wed, 21 Dec 2016 14:43:41 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 12/21/2016 2:43:41 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

It has been noted that there is a discrepancy between the Primary Energy figure on the BRUKL report and that generated by the BREEAM New Construction ENE01 Compliance Checker.

BRE have made this statement:

(See section CN7 of this document)

Tags: Hevacomp Mechanical Designer, Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM

BRUKL and ENE01 Compliance Checker differences

Duncan Brown — Wed, 21 Dec 2016 14:43:21 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 12/21/2016 2:43:21 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

It has been noted that there is a discrepancy between the Primary Energy figure on the BRUKL report and that generated by the BREEAM New Construction ENE01 Compliance Checker.

BRE have made this statement:

(See section CN7 of this document)

Tags: Hevacomp Mechanical Designer, Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM

BRUKL and ENE01 Compliance Checker differences

Duncan Brown — Wed, 02 Nov 2016 16:26:00 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 11/2/2016 4:26:00 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

It has been noted that there is a discrepancy between the Primary Energy figure on the BRUKL report and that generated by the BREEAM New Construction ENE01 Compliance Checker.

BRE have made this statement:

Tags: Hevacomp Mechanical Designer, Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM

BRUKL and ENE01 Compliance Checker differences

Duncan Brown — Wed, 02 Nov 2016 16:25:31 GMT

Revision 3 posted to Hevacomp Wiki by Duncan Brown on 11/2/2016 4:25:31 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

It has been noted that there is a discrepancy between the Primary Energy figure on the BRUKL report and that generated by the BREEAM New Construction ENE01 Compliance Checker.

BRE have made this statement:

Tags: Hevacomp Mechanical Designer, Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM

BRUKL and ENE01 Compliance Checker differences

Duncan Brown — Tue, 08 Mar 2016 17:02:17 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 3/8/2016 5:02:17 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

It has been noted that there is a discrepancy between the Primary Energy figure on the BRUKL report and that generated by the BREEAM New Construction ENE01 Compliance Checker.

BRE have made this statement:

"Differences in the figures for the BRUKL and BREEAM documents are due to a difference in the scope for the energy value. Current versions of the approved building energy modelling software calculate energy consumption on the basis of delivered energy, not primary energy, so it will not be possible to use the figures reported in the BRUKL Output Document (technical data sheet) to accurately determine the number of BREEAM credits achieved. Until such time as the next version of the National Calculation Methodology is revised to include primary energy, BREEAM assessors and consultants will need to upload their BRUKL output files to the BREEAM Compliance Checker website to accurately calculate and verify the three EPRs for demand, consumption and CO2 and the number of BREEAM credits achieved.'

External links

Bentley homepage

Bentley LEARN Server

Tags: Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM

BRUKL and ENE01 Compliance Checker differences

Duncan Brown — Tue, 08 Mar 2016 16:53:00 GMT

Revision 1 posted to Hevacomp Wiki by Duncan Brown on 3/8/2016 4:53:00 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

More information can be found on this forum

External links

Bentley homepage

Bentley LEARN Server

Tags: Compliance Checker ENE01, BRUKL, BRE, PartL, BREEAM