You are currently reviewing an older revision of this page.
The following are instructions and example of how to correctly draw a reverse return system in Netsys Heating.
In Netsys Heating you must use a combined Flow & Return pipe to connect to Emitters. You cannot connect separate single flow and single return into them. The same applies to the System Marker which also needs to be placed on a combined Flow & Return pipe. As such when drawing a reverse return system you need to include some short sections combined Flow & Return pipe. You then connect the separate single flow and single return pipes into these combined Flow and Return pipes.
Tip: When drawing and connecting single flow and single return pipes it is advised to use the Zoom > Regen option in order to confirm that pipes have been correctly connected.
Product TechNotes and FAQs
Building Product TechNotes And FAQs
Bentley homepage
HevacompMechanical Designer
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!