XML document is not produced

Shane Regan — Fri, 24 Sep 2021 10:24:49 GMT

Current Revision posted to Hevacomp Wiki by Shane Regan on 9/24/2021 10:24:49 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

An XML file will not be generated for England, Northern Ireland, or Wales when using Hevacomp. This is because the latest SBEM version must be used and is now available in OpenBuildings Energy Simulator.

Hevacomp continues to be able to produce Scottish XML's at this time.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Ireland, XML generating, XML

XML document is not produced

Shane Regan — Fri, 09 Oct 2020 14:22:36 GMT

Revision 17 posted to Hevacomp Wiki by Shane Regan on 10/9/2020 2:22:36 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Using an incorrect version of the software

The latest version of SBEM must be used. Using the incorrect version to produce an EPC will preclude production of an XML file.

*IMPORTANT UPDATE: Please see this announcement in relation to this matter*

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

an internet connection
if you connect through a proxy, that details are entered in the LAN settings option
the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

The PartL program contains a data check to see whether any data has been changed between running calculations. If no data has changed, then the last set of results will be produced and this will bypass the XML generation.

For software versions earlier than SP5

Run the calculation first on one room, and then on all rooms.

For software version SP5 and above

Click on any tab other than results. Push and hold the shift key, now click on the results tab. Continue to hold shift for a few moments.

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Ireland, XML generating, XML

XML document is not produced

Shane Regan — Mon, 28 Sep 2020 14:25:38 GMT

Revision 16 posted to Hevacomp Wiki by Shane Regan on 9/28/2020 2:25:38 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Using an incorrect version of the software

The latest version of SBEM must be used.

Using the incorrect version to produce an EPC will preclude production of an XML file

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

an internet connection
if you connect through a proxy, that details are entered in the LAN settings option
the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For software versions earlier than SP5

Run the calculation first on one room, and then on all rooms.

For software version SP5 and above

Click on any tab other than results. Push and hold the shift key, now click on the results tab. Continue to hold shift for a few moments.

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Ireland, XML generating, XML

XML document is not produced

Shane Regan — Mon, 24 Aug 2020 09:13:48 GMT

Revision 15 posted to Hevacomp Wiki by Shane Regan on 8/24/2020 9:13:48 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.3.a) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.g) - Northern Ireland

PartL 2006 (SBEM v3.5.c) - Republic of Ireland (PartL 2006 is available in Hevacomp v25 only)

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change - always ensure you are using the latest update

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

an internet connection
if you connect through a proxy, that details are entered in the LAN settings option
the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For software versions earlier than SP5

Run the calculation first on one room, and then on all rooms.

For software version SP5 and above

Click on any tab other than results. Push and hold the shift key, now click on the results tab. Continue to hold shift for a few moments.

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, Ireland, XML generating, XML

XML document is not produced

Duncan Brown — Thu, 16 Mar 2017 10:55:37 GMT

Revision 14 posted to Hevacomp Wiki by Duncan Brown on 3/16/2017 10:55:37 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

First of all, ensure that your property address and insurance details are entered accurately. Once this is checked you should consider the following:

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.3.a) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.g) - Northern Ireland, Republic of Ireland

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change - always ensure you are using the latest update

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

an internet connection
if you connect through a proxy, that details are entered in the LAN settings option
the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For software versions earlier than SP5

Run the calculation first on one room, and then on all rooms.

For software version SP5 and above

Click on any tab other than results. Push and hold the shift key, now click on the results tab. Continue to hold shift for a few moments.

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, XML generating, XML

XML document is not produced

Duncan Brown — Wed, 15 Mar 2017 14:53:27 GMT

Revision 13 posted to Hevacomp Wiki by Duncan Brown on 3/15/2017 2:53:27 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.3.a) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.g) - Northern Ireland, Republic of Ireland

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For software versions earlier than SP5

To force a full recalculation, run the calculation first on one room, and then on all rooms.

For software version SP5 and above

Click on any tab other than results. Push and hold the shift key, now click on the results tab. Continue to hold shift for a few moments.

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Extra Notes

It is also vitally important to ensure the property address and insurance details are entered accurately. Failure to do so could cause issues with XML generation and lodgement with your scheme provider.

Tags: SBEM, Hevacomp Mechanical Designer, PartL, XML generating, XML

XML document is not produced

Duncan Brown — Mon, 13 Mar 2017 15:54:05 GMT

Revision 12 posted to Hevacomp Wiki by Duncan Brown on 3/13/2017 3:54:05 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.3.a) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.g) - Northern Ireland, Republic of Ireland

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Extra Notes

Tags: SBEM, Hevacomp Mechanical Designer, PartL, XML generating, XML

XML document is not produced

Duncan Brown — Thu, 03 Nov 2016 16:30:33 GMT

Revision 11 posted to Hevacomp Wiki by Duncan Brown on 11/3/2016 4:30:33 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.g) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.e) - Northern Ireland, Republic of Ireland

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

Further information available here.

6. Entering a EPCGEN.NET key

This function has been removed. The EPCGEN field should be kept empty at all times.

Extra Notes

Tags: SBEM, Hevacomp Mechanical Designer, PartL, XML generating, XML

XML document is not produced

Duncan Brown — Tue, 28 Jun 2016 10:42:39 GMT

Revision 10 posted to Hevacomp Wiki by Duncan Brown on 6/28/2016 10:42:39 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.g) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.e) - Northern Ireland, Republic of Ireland

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

Further information available here.

Extra Notes

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Shane Regan — Fri, 27 May 2016 15:16:06 GMT

Revision 9 posted to Hevacomp Wiki by Shane Regan on 5/27/2016 3:16:06 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.g) - England, Scotland, Wales, Jersey

PartL 2010 (SBEM v4.1.e) - Northern Ireland, Republic of Ireland

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

Further information available here.

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Shane Regan — Mon, 29 Feb 2016 11:47:04 GMT

Revision 8 posted to Hevacomp Wiki by Shane Regan on 2/29/2016 11:47:04 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.d.2) - England

PartL 2010 (SBEM v4.1.e) - Scotland, Northern Ireland, Republic of Ireland, Wales

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Stephen Brown — Tue, 17 Mar 2015 11:44:58 GMT

Revision 7 posted to Hevacomp Wiki by Stephen Brown on 3/17/2015 11:44:58 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.b) - England

PartL 2010 (SBEM v4.1.e) - Scotland, Northern Ireland, Republic of Ireland, Wales

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Duncan Brown — Fri, 12 Dec 2014 16:41:39 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 12/12/2014 4:41:39 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.b) - England

PartL 2010 (SBEM v4.1.e) - Scotland, Northern Ireland, Republic of Ireland, Wales

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Duncan Brown — Fri, 12 Dec 2014 16:41:09 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 12/12/2014 4:41:09 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.b) - England

PartL 2010 (SBEM v4.1.e) - Scotland, Northern Ireland, Republic of Ireland, Wales

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Duncan Brown — Wed, 23 Jul 2014 11:28:00 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 7/23/2014 11:28:00 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a successful EPC calculation, an XML document is normally produced within the project folder that can be used to lodge the EPC. If one isn't produced, the following article should help.

Method

1. Using an incorrect version of the software

At time going to press, the following versions should be used for EPC production:

PartL 2013 (SBEM v5.2.b) - England

PartL 2010 (SBEM v4.1.e) - Scotland, Northern Ireland, Republic of Ireland, Wales

Using the incorrect version to produce an EPC will preclude production of an XML file

These versions and locations are subject to change.
For the most up to date information please contact your accredited scheme provider

2. Incorrect assessor details

You must ensure you are using the correctly selected scheme provider and assessor details. If you are unsure of the assessor details, please check with your accredited scheme provider.

3. Connection problems

The software must be able to contact the Landmark Registry website. Ensure that you have:

a] an internet connection
b] if you connect through a proxy, that details are entered in the LAN settings option
c] the firewall is allowing access to the Landmark Registry

4. Forcing a full re-calculation

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Elisabeth Pry — Thu, 27 Jun 2013 19:47:47 GMT

Revision 3 posted to Hevacomp Wiki by Elisabeth Pry on 6/27/2013 7:47:47 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

After a succesful calculation, an XML document is normally produced that can be used to lodge the EPC.

Method

To see reasons why this may not be produced, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Part L, SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, Hevacomp, V8i V25, PartL, design database, XML, Building Performance

XML document is not produced

Duncan Brown — Tue, 17 Jul 2012 09:23:40 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 7/17/2012 9:23:40 AM

Document Information

Document Type: TechNote

Product(s): Hevacomp Mechanical Designer

Version(s): All

Original Author: Bentley Technical Support Group

Overview

After a succesful calculation, an XML document is normally produced that can be used to lodge the EPC.

Method

To see reasons why this may not be produced, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SBEM XML production

Part L - XML document is not produced

Duncan Brown — Mon, 16 Jul 2012 13:39:15 GMT

Revision 1 posted to Hevacomp Wiki by Duncan Brown on 7/16/2012 1:39:15 PM

Document Information

Document Type: TechNote

Product(s): Hevacomp Mechanical Designer

Version(s): All

Original Author: Bentley Technical Support Group

Overview

After a succesful calculation, an XML document is normally produced that can be used to lodge the EPC.

Method

To see reasons why this may not be produced, click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SBEM XML production

XML document is not produced

XML document is not produced

Overview

Method

XML document is not produced

Overview

Method

1. Using an incorrect version of the software

2. Incorrect assessor details

3. Connection problems

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

6. Entering a EPCGEN.NET key

XML document is not produced

Overview

Method

1. Using an incorrect version of the software

2. Incorrect assessor details

3. Connection problems

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

6. Entering a EPCGEN.NET key

XML document is not produced

Overview

Method

1. Using an incorrect version of the software

2. Incorrect assessor details

3. Connection problems

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

6. Entering a EPCGEN.NET key

XML document is not produced

Overview

Method

1. Using an incorrect version of the software

2. Incorrect assessor details

3. Connection problems

4. Forcing a full re-calculation

5. No Potential Measures set up for Scottish EPC

6. Entering a EPCGEN.NET key

XML document is not produced

Overview

Method

Extra Notes

XML document is not produced

Overview

Method

Extra Notes

XML document is not produced

Overview

Method

Extra Notes

XML document is not produced

Overview

Method

Extra Notes

See Also

External Links

Comments or Corrections?

XML document is not produced

Overview

Method

See Also

External Links

Comments or Corrections?

XML document is not produced

Overview

Method

See Also

External Links

Comments or Corrections?

XML document is not produced

Overview

Method

See Also

External Links

Comments or Corrections?

XML document is not produced

Overview

Method