Thermal Bridging/PSI values

Shane Regan — Mon, 24 Aug 2020 09:13:45 GMT

Current Revision posted to Hevacomp Wiki by Shane Regan on 8/24/2020 9:13:45 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 and 2013 regulations.

When choosing thermal bridges there are a number of considerations. If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.
If user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticked.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

Tags: SBEM, Hevacomp Mechanical Designer, Thermal bridging, PartL

Thermal Bridging/PSI values

Duncan Brown — Thu, 16 Mar 2017 12:04:09 GMT

Revision 12 posted to Hevacomp Wiki by Duncan Brown on 3/16/2017 12:04:09 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 and 2013 regulations.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticked.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

Tags: SBEM, Hevacomp Mechanical Designer, Thermal bridging, PartL

Thermal Bridging/PSI values

Duncan Brown — Thu, 03 Nov 2016 16:18:28 GMT

Revision 11 posted to Hevacomp Wiki by Duncan Brown on 11/3/2016 4:18:28 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 and 2013 regulations.

When choosing thermal bridges there are a number of considerations. If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.It user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

Tags: SBEM, Hevacomp Mechanical Designer, Thermal bridging, PartL

Thermal Bridging/PSI values (2010 regulations)

Stephen Brown — Tue, 17 Mar 2015 11:43:20 GMT

Revision 10 posted to Hevacomp Wiki by Stephen Brown on 3/17/2015 11:43:20 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.It user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values (2010 regulations)

Duncan Brown — Fri, 12 Dec 2014 15:45:45 GMT

Revision 9 posted to Hevacomp Wiki by Duncan Brown on 12/12/2014 3:45:45 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values (2010 regulations)

Duncan Brown — Fri, 12 Dec 2014 15:44:19 GMT

Revision 8 posted to Hevacomp Wiki by Duncan Brown on 12/12/2014 3:44:19 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values (2010 regulations)

Duncan Brown — Thu, 28 Aug 2014 14:03:23 GMT

Revision 7 posted to Hevacomp Wiki by Duncan Brown on 8/28/2014 2:03:23 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.

It user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values (2010 regulations)

Duncan Brown — Thu, 28 Aug 2014 11:53:44 GMT

Revision 6 posted to Hevacomp Wiki by Duncan Brown on 8/28/2014 11:53:44 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.

It user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values (2010 regulations)

Duncan Brown — Thu, 28 Aug 2014 11:51:30 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 8/28/2014 11:51:30 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.

It user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

If you wish your own figures to be considered for Thermal Bridging you should enter your figures into the corresponding input field and ensure that "Accredited detail" is ticket.

If the option remains unticked then regardless of any input data, default figures will be used.

In accordance with iSBEM/SBEM technical manual, if default figures are used for Thermal Bridging then they will be subject to an adjustment figure as defined in the 2010 ADL2A document.

Default thermal bridges after adjustment (w/mk)

Junction	Metal clad	Non metal clad
Roof/Wall	0.42	0.18
Wall/Ground floor	1.725	0.24
Wall/Wall (corner)	0.375	0.135
Wall/not ground floor	0.04	0.11
Lintel (window/door)	1.905	0.45
Sill (window)	1.905	0.08
Jamb (window/door)	1.905	0.09

To see more information on this method, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values (2010 regulations)

Duncan Brown — Thu, 28 Aug 2014 11:43:11 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 8/28/2014 11:43:11 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjusted by SBEM if they are not accredited figures.

Method

The method for entering PSI data has changed between the 2006 and 2010 regulations.

When choosing thermal bridges there are a number of considerations.

If user detail are not entered and the thermal bridging is not accredited then the figures displayed on the screen will be used.

It user details are not entered and the thermal bridging is accredited then the figures displayed on the screen will be used.

To see more information on this method, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values

Elisabeth Pry — Wed, 26 Jun 2013 20:12:16 GMT

Revision 3 posted to Hevacomp Wiki by Elisabeth Pry on 6/26/2013 8:12:16 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjust by SBEM if they are not accredited figures.

Method

To see more information on this method, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

Thermal Bridging/PSI values

Duncan Brown — Tue, 17 Jul 2012 09:21:55 GMT

Revision 2 posted to Hevacomp Wiki by Duncan Brown on 7/17/2012 9:21:55 AM

Document Information

Document Type: TechNote

Product(s): Hevacomp Mechanical Designer

Version(s): V8i

Original Author: Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjust by SBEM if they are not accredited figures.

Method

To see more information on this method, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Part L - Thermal Bridging/PSI values

Duncan Brown — Mon, 16 Jul 2012 13:36:34 GMT

Revision 1 posted to Hevacomp Wiki by Duncan Brown on 7/16/2012 1:36:34 PM

Document Information

Document Type: TechNote

Product(s): Hevacomp Mechanical Designer

Version(s): V8i

Original Author: Bentley Technical Support Group

Overview

PSI values for thermal bridging can be adjust by SBEM if they are not accredited figures.

Method

To see more information on this method, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Thermal Bridging/PSI values

Thermal Bridging/PSI values

Overview

Method

Thermal Bridging/PSI values

Overview

Method

Thermal Bridging/PSI values

Overview

Method

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values (2010 regulations)

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values

Overview

Method

See Also

External Links

Comments or Corrections?

Thermal Bridging/PSI values

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?

Part L - Thermal Bridging/PSI values

Document Information

Overview

Method

See Also

External Links

Comments or Corrections?