U-value check in Compliance Report

Shane Regan — Mon, 24 Aug 2020 09:13:46 GMT

Current Revision posted to Hevacomp Wiki by Shane Regan on 8/24/2020 9:13:46 AM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

The BRUKL compliance report contains Criterion 2 which considers the operation of the building fabric, and flags any figures (Ua-calc > Ua-limit) that exceed the allowed maximums. It is possible to have surface U-values that exceed the stated maximums, but do not flag a warning.

In cases such as this, all the U-values of windows in the room are being considered. The values for Ua-calc are calculated by the SBEM calculation engine using an area-weighted average method. Therefor, if glazing with the high U-value only account for a small percentage of the overall glazed area of the room(s) then it will have a minimal impact in the final result.

The glazing with the highest U-value is still shown in the Ui-calc column.

Tags: SBEM, Hevacomp Mechanical Designer, u-value, check, PartL, U value

U-value check in Compliance Report

Duncan Brown — Thu, 03 Nov 2016 16:25:10 GMT

Revision 7 posted to Hevacomp Wiki by Duncan Brown on 11/3/2016 4:25:10 PM

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i (N/A)
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A

Overview

The glazing with the highest U-value is still shown in the Ui-calc column.

Tags: SBEM, Hevacomp Mechanical Designer, u-value, check, PartL, U value

U-value check in Compliance Report

Stephen Brown — Tue, 17 Mar 2015 11:44:12 GMT

Revision 6 posted to Hevacomp Wiki by Stephen Brown on 3/17/2015 11:44:12 AM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

The glazing with the highest U-value is still shown in the Ui-calc column.

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

U-value check in Compliance Report

Duncan Brown — Fri, 12 Dec 2014 16:13:55 GMT

Revision 5 posted to Hevacomp Wiki by Duncan Brown on 12/12/2014 4:13:55 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

The glazing with the highest U-value is still shown in the Ui-calc column.

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

U-value check in Compliance Report

Duncan Brown — Wed, 23 Jul 2014 14:06:44 GMT

Revision 4 posted to Hevacomp Wiki by Duncan Brown on 7/23/2014 2:06:44 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

The glazing with the highest U-value is still shown in the Ui-calc column.

For more information please consult the relevant SBEM technical guide (link can be found here)

For an important note on the PartL calculation, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

U-value check in Compliance Report

Elisabeth Pry — Thu, 27 Jun 2013 19:45:44 GMT

Revision 3 posted to Hevacomp Wiki by Elisabeth Pry on 6/27/2013 7:45:44 PM


	Applies To

	Product(s):	Hevacomp Mechanical Designer
	Version(s):	V8i
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Overview

This document provides information on the U-value check within the BRUKL Compliance Report .

For further information please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: SELECTservices, SBEM, Hevacomp Mechanical Designer, TechNote, V8i V25, partl part l, design database ddb, Building Performance

U-value check in Compliance Report

Shane Regan — Thu, 02 Aug 2012 08:57:00 GMT

Revision 2 posted to Hevacomp Wiki by Shane Regan on 8/2/2012 8:57:00 AM

Document Information

Document Type: TechNote

Product(s): Hevacomp Mechanical Designer

Version(s): V8i

Original Author: Bentley Technical Support Group

Overview

This document provides information on the U-value check within the BRUKL Compliance Report .

For further information please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

U-value check in Compliance Report

Shane Regan — Thu, 02 Aug 2012 08:55:21 GMT

Revision 1 posted to Hevacomp Wiki by Shane Regan on 8/2/2012 8:55:21 AM

Document Information

Document Type: TechNote

Product(s): Hevacomp Mechanical Designer

Version(s): V8i

Original Author: Bentley Technical Support Group

Overview

This document provides information on the U-value check within the BRUKL Compliance Report.

Method

To see how to convert your projects, please click here

External Links

Bentley homepage

HevacompMechanical Designer

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

U-value check in Compliance Report

U-value check in Compliance Report

Overview

U-value check in Compliance Report

Overview

U-value check in Compliance Report

Overview

See Also

External Links

Comments or Corrections?

U-value check in Compliance Report

Overview

See Also

External Links

Comments or Corrections?

U-value check in Compliance Report

Overview

See Also

External Links

Comments or Corrections?

U-value check in Compliance Report

Overview

See Also

External Links

Comments or Corrections?

U-value check in Compliance Report

Document Information

Overview

See Also

External Links

Comments or Corrections?

U-value check in Compliance Report

Document Information

Overview

See Also

External Links

Comments or Corrections?