This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Synchro Control vs Lumenrt (HUB) Video Clip Simulation

Offline Ivan Moreno Gonzalez over 1 year ago

Good morning, when loading the Synchro model and opening it in LUMENRT PRO through the HUB, the Simulation CLIP does not go up

Parents

0 Offline Ivan Moreno Gonzalez Wed, Nov 2 2022 5:02 PM

I have worked for 1 year in this way generating the hub every month and loading the models to work in LUMENRT but I have never had a problem

Ivan Moreno Gonzalez

BIM Coordinator

Colombia

C: (+57) 3125190284

ivan.morenogonzalez@aecom.com

AECOM Colombia

Carrera 11 No. 93 - 53 Piso 8, Bogota, Colombia

T: (+571) 6346312

www.aecom.com

De: Arpit Prakash <bounce-ebb95f14-3521-4974-86fe-6ee7f8a3c4b3@communities.bentley.com>
Enviado el: miércoles, 2 de noviembre de 2022 3:58 p. m.
Para: SynchroForum@communities.bentley.com
Asunto: RE: [SYNCHRO Forum] Synchro Control vs Lumenrt (HUB) Video Clip Simulation

Update from Bentley Communities Arpit Prakash Ivan, It seems you were working on a Trial Project, which does not provide any 4D functionality. This is why the simulation clip is not available in LumenRT. View online You received this notification

Update from Bentley Communities

Arpit Prakash

Ivan,

It seems you were working on a Trial Project, which does not provide any 4D functionality. This is why the simulation clip is not available in LumenRT.

View online

You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here.

Flag this post as spam/abuse.

Reply